Remote Access - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Remote Access

This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
To create a new rule, click the ADD button (
Figure 132. The window for adding a rule for remote management.
Figure 131. The Advanced / Remote Access page.
Page 173 of 235
).
Configuring via Web-based Interface