D-Link DAP-600P User Manual page 129

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
When the WPS function is enabled, the Information section is available on the page.
Parameter
WPS state
Default PIN code
Network name (SSID)
Network authentication The network authentication type specified for the wireless network.
Encryption
Password PSK
UPDATE
The state of the WPS function:
• Configured (all needed settings are specified; these settings
will be used upon establishing the wireless connection)
• Unconfigured (after activating the WPS function, the SSID
and the encryption key will be configured automatically, the
network authentication type will be changed to WPA2-PSK).
The PIN code of the access point. This parameter is used when
connecting the access point to a registrar to set the parameters of the
WPS function.
The name of the access point's wireless network.
The encryption type specified for the wireless network.
The encryption password specified for the wireless network.
Click the button to update the data on the page.
Page 129 of 235
Configuring via Web-based Interface
Description