Firewall; Ip Filter - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Firewall

This section is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
In this menu you can configure the firewall of the access point:
• add rules for IP filtering
•
create virtual servers
•
define a DMZ
• specify restrictions on access to certain web sites.

IP Filter

On the Firewall / IP Filter page, you can create new rules for filtering IP packets and edit or
remove existing rules.
To create a new rule, click the ADD button (
Figure 142. The Firewall / IP Filter page.
).
Page 189 of 235
Configuring via Web-based Interface