D-Link DAP-600P User Manual page 97

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Figure 83. The page for creating a new Static IPv6 connection. The IPv6 section.
Parameter
IPv6 address
Prefix
Gateway IPv6 address
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Get IPv6
Enable prefix
delegation
Obtain DNS server
addresses
automatically
IPv6
For Static IPv6 type
Enter an IPv6 address for this WAN connection.
The length of the subnet prefix. The value 64 is used usually.
Enter an IPv6 address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Move the switch to the right if it is necessary that the access point
requests a prefix to configure IPv6 addresses for the local network
from a delegating router.
Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
server and Secondary IPv6 DNS server fields are not available
for editing.
Page 97 of 235
Configuring via Web-based Interface
Description