D-Link DAP-600P User Manual page 121

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Parameter
Broadcast wireless
network
Clients isolation
Enable guest network
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DAP-600P can connect
to another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the Set
schedule button (
new schedule (see the
existing one. Existing schedules are displayed in the Interval of
execution drop-down list in the simplified mode.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the Enable value from the Action
for rule upon activation of schedule drop-down list and click
the SAVE button. When the wireless connection is disabled, the
device will not be able to enable broadcasting of this wireless
network on schedule.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the Disable value from the
Action for rule upon activation of schedule drop-down list
and click the SAVE button.
To change or delete the schedule, click the Set schedule button
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the button in the
line of the network.
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the access point's LAN.
Page 121 of 235
Configuring via Web-based Interface
Description
). In the opened window, you can create a
Schedule section, page 207) or use the