DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
SNMP
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / SNMP page, you can enable and configure the SNMP agent of the access
point.
The SNMP agent is a service which sends data on the state and settings of the device where is it
enabled to the SNMP manager (the network management system of your ISP or system
administrator).
Figure 123. The Advanced / SNMP page.
Page 162 of 235
Configuring via Web-based Interface