Controls On The Remote Control; Information Shown On Remote Control Display; Initial Connection Between Remote Control And Prosthesis - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

7.1 Controls on the remote control

7.2 Information shown on remote control display

7.3 Initial connection between remote control and prosthesis

INFORMATION
The Bluetooth must be activated on the prosthesis prior to establishing a connection.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down or by
connecting/disconnecting the battery charger. Bluetooth is then turned on for approx. 2
minutes. The connection must be established during this period.
1) Navigation key
Select menu options/ change settings/ start to establish
connection
2) , Navigation keys
Call up additional menu options/set, change paramet­
ers
3) Display
Display of remote control battery charge level and the
last connected product
4) Navigation key
Select menu options/ change settings
5) Enter key
Switch on remote control unit/confirm selection, menu
option
6) Connections (under cover cap)
Charging receptacle for power supply connection
1. – Remote control battery charge level
2. – Charge level of battery for currently connected product
- Product is charging. The menu items "STATUS" and
"DEVICE SETTINGS" cannot be called up. In addition, the
product mode cannot be changed.
3. 68% – charge level of battery for currently connected
product, as a percentage
4. 1 – Mode currently set
„!" – Service interval elapsed
5. Black background – currently selected menu option, e.g.:
"STATUS" or selected function
6. – Menu locked
Certain menus are locked if, for example, the battery for the
product is being charged.
To leave a menu without saving changes, use the
select the symbol , and confirm this with the
key to
key.
Ottobock | 65