Changing Connections - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

2) Use the , keys to select the menu option "PAIRING", then confirm this with the
start the prosthesis search (see fig. 13).
→ If a prosthesis was found within the range, its serial number appears in the display (see
fig. 14).
3) Compare the serial number that is displayed to the serial number of the prosthesis you want
to connect to.
If the serial number 000000000 is displayed (multiple prostheses within the range), use the ,
, , keys to enter the serial number of the prosthesis you want to connect to.
4) Press the key.
→ Once the connection has been established, the data are read from the prosthesis (see
fig. 15). This process may take a few minutes. The blue LED will flash during the data
transfer process.
5) Use the , keys to select one of the four items to which the prosthesis should be saved and
confirm this with the key.
INFORMATION: In addition, a prosthesis (item) that already exists can be overwritten.
→ Data are read from the prosthesis and saved to the selected item.
→ The prosthesis is then displayed on the main menu.
Delete existing connection (menu option "DELETE CONNECTION")
INFORMATION
The already existing connection can also be deleted. This connection must be re-established
manually after the search is completed.
16
1) Use the , keys to select the menu option "RC SETTINGS" in the main menu and confirm
this with the key (see fig. 16).
2) Use the , keys to select the menu option "DELETE CONNECTION" and confirm this with
the key (see fig. 17).
To leave the menu without saving changes, use the
confirm this with the key.
3) Use the , keys to select the connection you want to delete and confirm this with the key
(see fig. 18).
→ The connection is deleted.
→ The main menu is then displayed (see fig. 19).

7.7 Changing connections

If more than one prosthesis is stored, a user can toggle between the stored prostheses.
17 18
key to select the
key to
19
symbol and
Ottobock | 69