Changing Remote Control Settings - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

5
1) Once a connection has been established, use the ,
"STATUS" in the main menu and confirm this with the key.
2) Use the , keys to select the following information:
Menu option
TRIP:1747
STEP:1747
BATT.:68
BLUETOOTH

7.5 Changing remote control settings

8
1) Use the , keys to select the menu option "RC SETTINGS" in the main menu and confirm
this with the key.
2) Use the , keys to select from the following settings:
Changing time and date (menu option "16:22/06.02.14 or PM 4:22/02-06-14")
1) Press the key.
2) Use the , keys to select the appropriate option. You can use the
ning of the line to toggle between 12-hour mode and 24-hour mode.
3) Use the , keys to change the option.
4) Press the key to save the changes and leave the menu.
Establishing connection to prosthesis or setting up additional connections (menu option
"PAIRING")
Up to four prostheses can be managed using this remote control (see Page 68).
Change font size on remote control display (menu option "ZOOM")
1) Press the key.
2) Use the , keys to select the font size you want (see fig. 10):
"1" – normal font
"2" – large font
6
Description
Daily step counter
Total step counter
Current prosthesis charge
level, as a percentage
Switch Bluetooth function of
the prosthesis on or off
9
7
keys to select the menu option
Possible actions
Reset the counter by using
the key to confirm the menu
option
For informational purposes
only
For informational purposes
only
The Bluetooth function of the
prosthesis can be switched on
or off by using the key to
confirm the menu option.
10 11
, keys at the begin­
Ottobock | 67