Managing Prostheses - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

3) Press the key to save your changes.
To leave the menu without saving changes, use the
confirm this with the key.
Deleting connection to prosthesis (menu option "DELETE CONNECTION")
Prosthesis connections that were already stored can be deleted. See next section.
Calling up remote control information (menu option "INFO")
This menu is for informational purposes only. No changes can be made.
The menu can be used to retrieve information on the firmware version of the remote control and
the signal strength of the Bluetooth connection to the prosthesis.
1) Press the key.
2) Use the , keys to select from the following options:
"RC VERSION: 1.0.0.41.0.0.4" – Firmware version of remote control
"SIGNAL:" – Signal strength of Bluetooth connection (distance from remote control unit to
prosthesis)
*: low signal strength/**: medium signal strength/***: good signal strength
3) To leave the menu without saving changes, use the
confirm this with the key.

7.6 Managing prostheses

Connections with up to four different prostheses can be stored in this remote control. However, a
prosthesis can only be connected to one remote control at any given time.
INFORMATION
The connection to the original remote control can no longer be established if the prosthesis is
connected to another remote control. As a result, the message "DEVICE DISCONNECTED"
appears in the display of the original remote control when the connection is established.
INFORMATION
An already existing connection to a prosthesis is terminated when a search is executed for avail­
able prostheses. This connection must be re-established manually after the search is completed.
It is not possible to automatically connect to the prosthesis.
Adding new (prosthesis) connection (menu option "PAIRING")
INFORMATION
The Bluetooth must be activated on the prosthesis prior to establishing a connection.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down or by
connecting/disconnecting the battery charger. Bluetooth is then turned on for approx. 2
minutes. The connection must be established during this period.
12
1) Use the , keys to select the menu option "RC SETTINGS" in the main menu and confirm
this with the key (see fig. 12).
68 | Ottobock
13
key to select the
key to select the
14
symbol and
symbol and
15