Once the connection has been established, the data are read from the prosthesis. This process
may take a few seconds. After adding/deleting a component, the main menu appears with the
names of the connected prostheses.
8.5.1 Managing prostheses
Connections with up to four different components can be stored in the app. However, a compon
ent can only be connected to one device or remote control at a time.
Adding component
1) If components have already been added, tap the symbol (extended menu) in the main menu.
2) Then tap the option "Manage components".
3) In the following screen, tap the "Add component" button.
→ The "Preparation" screen appears. The serial number of the component should be
entered here. The serial number begins with the letters "SN".
4) Follow the subsequent instructions on the screen.
5) After the PIN code is entered, a connection to the prosthesis is established.
→ While the connection is being established, 3 beep signals sound and the
appears.
The
symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the prosthesis. This
process may take up to a minute.
The main menu will then appear with the name of the connected prosthesis.
Deleting a component
1) Tap the symbol (extended menu) in the main menu.
2) Then tap the option "Manage components".
3) Tap the symbol under the component you want to delete.
→ The component is deleted.
Connecting component with multiple devices
A component can be connected to multiple devices (Initial connection between remote control
app and prosthesis).
74 | Ottobock
symbol