7.7.1 Changing connections (with remote control switched off)
20
1) Use the key to activate the remote control.
2) Press the
key to start a prosthesis search.
→ All prostheses that are already stored are displayed. The currently connected prosthesis is
already selected (see fig. 20).
3) Use the
,
keys to select the prosthesis required.
4) Confirm with the key (see fig. 21).
→ Once the connection has been established successfully, the data are read from the pros
thesis (see fig. 22). This process may take a few minutes.
Once the connection has been established successfully, the main menu appears with the name of
the connected prosthesis (see fig. 23).
7.7.2 Changing connections (with remote control switched on)
24
1) Select the name of the currently connected prosthesis in the main menu, using the
2) Confirm with the key (see fig. 24).
→ All prostheses that have already been stored are displayed. The currently connected pros
thesis is already selected.
3) Use the
,
keys to select the prosthesis required.
4) Confirm with the key (see fig. 25).
→ Once the connection has been established successfully, the data are read from the pros
thesis. This process may take a few minutes (see fig. 26).
Once the connection has been established successfully, the main menu appears with the name of
the connected prosthesis (see fig. 27).
70 | Ottobock
21
25
22
26
23
27
key.