Storing Often Used Copy Settings In Memory (Mode Memory); Storing Copy Settings For A Copy Job - Canon imageRunner 400 Reference Manual

Storing Often Used Copy Settings in
Memory
Stored copy jobs can be quickly recalled by pressing the memory key. It is also possible
to assign a name when storing a copy job.

Storing Copy Settings for a Copy Job

3–32
(MODE MEMORY)
1
Programme the copy job that you want to store in
the Basic Features or Special Features screen.
If the copy job you want to store is shown in the Special Features
screen, press the [SPECIAL FEATURES] key.
MEMO
In the display on the left, [TWO PAGE SEPARATION] and
[MARGIN] are set.
2
After pressing the [SPECIAL FEATURES] key,
press the [MODE MEMORY] key.
MEMO
If the Special Features screen is already displayed at
Step-1, press the [MODE MEMORY] key without
pressing the [SPECIAL FEATURES] key.
3
Press the [STORE/ERASE] key.
4
Press the [STORE] key.