Error Messages - Yamaha PM5D Owner's Manual

Error Messages

Message
Parameter Locked.
Parameter Unlocked.
This Parameter is Locked.
Channel Copied.
Channel Pasted.
Nothing to Paste!
Cannot Paste to Different Channel Type.
No Card in Slot!
File Already Exist!
Saving Aborted.
Loading Aborted.
No Controllable Gain.
Tap Operation Ignored.
Cascade Unit Disconnected.
Additional Cascade Unit Detected.
Incorrect Cascade Connection!
Couldn't Store Scene on Slave Console!
Couldn't Edit Scene on Slave Console!
DME Disconnected.
No Response from External HA.
Processing Aborted.
Error Messages
These are messages displayed as popup windows in the center of the screen. After noting the content of the message, click the
OK button in the screen to close the popup window.
Message
Cannot Store!
Cannot Recall!
Memory Card Full!
File Not Found!
Couldn't Read File.
Couldn't Write File.
Couldn't Delete File.
Couldn't Open File.
Couldn't Close File.
Unsupported File Format!
No Files to Upload!
Low Battery!
Power Supply has Malfunctioned!
Total Slot Power Capability Exceeded!
344
PM5D/PM5D-RH Owner's Manual
Parameter Lock has been enabled.
Parameter Lock has been defeated.
The parameter you attempted to control is locked.
The selected channel settings were copied to the memory buffer.
The channel settings in the memory buffer were pasted to the selected channel.
Paste cannot be performed because there is no data in the memory buffer.
Paste cannot be performed because you are attempting to paste channel settings of a different type.
No memory card is inserted in the MEMORY CARD slot.
The memory card already contain a file/directory with the same name as the one you are attempting to
save, rename, or create.
Saving to memory card was aborted.
Loading from memory card was aborted.
You attempted to operate a gain knob that is currently disabled on the panel.
Tap operation was ignored because the TAP TEMPO button is not displayed in the screen.
The connection with a cascade-connected external device was broken.
A cascade-connected external device was newly detected.
The connection is not appropriate for the cascade settings.
The cascade-connected slave console was unable to store the scene because the scene was protected on
the slave console, or for some other reason.
The cascade-connected slave console was unable to edit the scene because the scene was protected on
the slave console, or for some other reason.
The connection with an external DME was broken.
No response from an external AD8HR or AD824.
A process was aborted.
Failed to store a scene memory or library.
Failed to recall a scene memory or library.
You attempted to save a file that was larger than the available capacity of the memory card.
The file/directory does not exist on the memory card.
Failed to read the file from the memory card.
Failed to write the file to the memory card.
Failed to delete the memory card file.
Failed to open the file from the memory card.
Failed to close the file on the memory card.
The file you attempted to load from the memory card is of an unsupported format.
Internal memory does not contain files to upload.
The backup battery voltage is low.
A problem has occurred with the PW800W power supply connected to the PM5D. Please contact your
Yamaha dealer.
The I/O cards installed in the slots exceed the rated power capacity.
Reference section
Meaning
Meaning