Warning/Error Messages - Yamaha CL1 Reference Manual

Warning/Error Messages

Message
xxx Parameters Copied.
xxx Parameters Initialized.
xxx Parameters Pasted.
xxx Parameters Swapped with Copy Buffer.
ALTERNATE FUNCTION: Turned off!
Assignment is Restricted to Max. 8 Sources!
Cannot Assign!
Cannot Bookmark This Popup.
Cannot Mount This Type of Device in This
Position.
Cannot Paste!
Cannot Recall!
Cannot Select This Channel.
Cannot Store!
Cannot Undo!
Channel Copied.
Channel Moved.
Channel Returned to Default Settings.
Couldn't Access File.
Couldn't Write File.
Current User Changed. [xxx]
Directory Not Empty!
EDITOR: Data Framing Error!
EDITOR: Data Overrun!
EDITOR: Rx Buffer Full!
EDITOR: Tx Buffer Full!
EFFECT CUE: Turned Off.
External HA Connection Conflict!
External Power Supply is Cut Off!
File Access is Busy!
Meaning
Parameter xxx was copied to the copy buffer.
Parameter xxx was initialized.
Parameter xxx was pasted from the copy buffer.
Parameter xxx was exchanged with the contents of the copy
buffer.
ALTERNATE FUNCTION was turned off.
The Monitor Define function allows a maximum of eight sources
to be selected, but you attempted to assign more than eight.
In the USER DEFINED KEYS popup of the CL3/CL1, you attempted
to edit an item that cannot be edited for that model.
This popup window cannot be bookmarked.
You attempted to mount a specific device at a position where it
cannot be mounted.
Cannot paste the character string.
Failed to recall a scene memory or library.
You attempted to select a channel that cannot be operated due to
your user level or some other reason.
Failed to store a scene memory or library.
You pressed the [UNDO] button when Undo was not available.
Channel settings have been copied.
Channel settings have been moved.
Channel settings have been returned to the default settings.
File on the USB flash drive could not be accessed for some reason.
File could not be saved to the USB flash drive.
Current user was changed to [xxx].
You attempted to delete a directory, but failed because there were
files remaining in the directory.
Invalid signals are being exchanged with CL Editor.
Too much data is being received at the CL Editor input port.
Too much data is being transmitted from the CL Editor output
port.
CUE was defeated because you switched from the EFFECT popup
window or the premium rack popup window to a different screen.
External HA data could not be recalled, because the state of
connections to the external HA has changed since the scene was
stored.
The PW800 (EXT) power supply connected to the CL series
console has stopped operating.
The following operation has not been performed yet because the
USB flash drive is being accessed.
Message
File Already Exists!
File Error [xx]!
File Protected!
Flash Memory Initializing Finished.
Help File Not Found!
Illegal Address!
Illegal MAC Address! Cannot Use Network.
Illegal Storage Format!
Internal Power Supply is Cut Off!
Internal Power Supply is Turned On.
KEY IN CUE: Turned Off.
Loading Aborted.
Loading Finished.
Low Battery!
Maximum Number of Audio Files Exceeded!
Memory Error! All Memories were
Initialized.
MIDI: Data Framing Error!
MIDI: Data Overrun!
MIDI: Rx Buffer Full!
MIDI: Tx Buffer Full!
No Access From Recorder!
No channel selected.
No Copy Item Selected.
No Corresponding Help Items.
No ID3 Tag exists. You can not edit.
No Response from External HA.
No Response from I/O DEVICE.
271
Meaning
The USB flash drive already contains a file/directory with the same
name as the one you are attempting to save, rename, or create.
Internal file access error
Overwriting was not possible because the file on the USB flash
drive is write-protected.
Memory initialization has been completed.
The help file has not been loaded.
The IP address or Gateway address setting is invalid.
Communication via the Network connector is not possible
because the MAC address setting has been damaged for some
reason. Please contact your Yamaha service center listed at the
end of the Owner's Manual (separate document).
The USB flash drive could not be accessed because its format is
invalid or unsupported.
The internal (INT) power supply has stopped operating.
Alternatively, some other problem has occurred. Contact a
Yamaha service center listed at the end of the owner's manual
(separate document).
The internal (INT) power supply has started up normally.
KEY IN CUE was defeated because you switched from the
DYNAMICS 1 popup window of an input channel to a different
screen.
Loading from USB flash drive was aborted.
Finished loading from USB flash drive.
The backup battery voltage is low.
The number of songs that can be managed by the USB memory
recorder has been exceeded.
All data has been initialized because the data in internal backup
memory has been lost, due to failure of the backup battery or
some other reason. Please contact your Yamaha service center
listed at the end of the operating manual (separate document).
An inappropriate signal is being input to the MIDI input port.
Too much data is being received at the MIDI input port.
To much data is being transmitted from the MIDI output port.
In the RECORDER screen, it is not possible to move to a level
higher than \YPE\SONGS\.
A copy-source channel was not selected in the GLOBAL PASTE
screen.
In the Global Paste screen, you attempted to paste without
having selected an item to paste.
The corresponding section was not found in the Hlep file.
The music file cannot be edited because it has no ID3 tag.
No response from an external AD8HR.
The I/O devices not responding.
Appendices
Reference Manual