Yamaha PM5D Owner's Manual page 168

SCENE function
• When the START OFFSET button is on
Edit the time (start offset time) after which the fader or
pan parameter of the corresponding channel will begin
changing when you recall a scene for which the Fade
function is enabled.
D Channel settings
Here you can turn the Fade function on/off and spec-
ify the fade time (or the start offset time) for each input
channel / output channel.
Use the channel name buttons to switch the Fade func-
tion on/off. The box below each button lets you specify
the fade time or start offset time. Move the cursor to a
box, and turn the [DATA] encoder or click the
buttons at the left and right to edit the value.
The color of the numerical value shown in the box will
change as follows.
• When the FADE TIME button is on
The value is displayed in white for channels whose start
offset time is "----" (unset), and in light blue for chan-
nels that are set to 0.1 or above.
• When the START OFFSET button is on
The value is displayed in red for channels whose start
offset time is "----" (unset), and in yellow for channels
that are set to 0.1 or above.
If desired, you can copy the fade time / offset time
value from one channel to another as follows. Move
the cursor to the box that displays the value you want
to copy; then hold down the [SHIFT] key and press the
[ENTER] key to access the JOB SELECT window.
In this window, select the copy-destination item and
click the OK button; the value of the selected channel
will be copied.
168
PM5D/PM5D-RH Owner's Manual
4 5 6
/
Reference section
E SET ALL
This button enables the Fade function for all input
channels or output channels.
F CLEAR ALL
This button disables the Fade function for all input
channels or output channels.