Storing Settings In The Effect Library - Yamaha PM5D Owner's Manual

Storing settings in the effect library

Here's how to store effect parameter settings in the effect
library.
1 In the DISPLAY ACCESS section, repeatedly
press the [EFFECT] key to access the EFFECT
PARAM screen.
EFFECT PARAM
The effect module whose data you want to store
2 Use the box in the upper left of the screen to
select the effect module whose settings you
want to store, and click the LIBRARY button.
The EFFECT LIBRARY screen will appear, allowing
you to recall or store settings in the effect library.
EFFECT LIBRARY
3 In the library list, choose the store-destination
number and click that line.
Note
Library items for which an "R" (read-only) appears in the right
column of the list are factory preset library items. These num-
bers cannot be overwritten.
4 Click the STORE button.
The EFFECT LIBRARY STORE window will appear,
LIBRARY button
allowing you to name the library item you are saving.
5 Use the character palette to assign a name to
the library item.
For details on using the character palette, refer to p.26.
6 Click the STORE button.
A window will ask you to confirm the Store operation.
7 To execute the Store operation, click the OK
button.
The data will be stored, and you will return to the pre-
vious screen.
If you click the CANCEL button instead of the OK but-
ton, the Store operation will be aborted and you will
return to the previous screen.
"R" (read-only)
PM5D/PM5D-RH Owner's Manual
Operating section
14
107