Midi Pgm Change (Midi Program Change) Screen - Yamaha PM5D Owner's Manual

E MMC OUTPUT PORT
This selects the port that will transmit MMC (MIDI
Machine Control).
F MIDI REMOTE OUTPUT PORT (MIDI remote
output port)
Here you can select the port from which MIDI mes-
sages will be transmitted by the MIDI Remote
function, for each of the four banks. Incoming mes-
sages used by the LEARN function of the MIDI
REMOTE screen are also received at this port.
G PM5D EDITOR (PM5D EDITOR connection
port)
Here you can select the port and ID number (1–8) used
to communicate with the PM5D EDITOR application,
which controls the PM5D from a computer.
MIDI PGM CHANGE (MIDI program
change) screen
5
In this screen you can select the scene or effect library
assigned to each MIDI program number.
MIDI PGM CHANGE
6
7
A MIDI SETUP
Select the ports that the PM5D will use to transmit and
receive MIDI messages, and the MIDI channels. This
item is linked with the settings in the MIDI SETUP
screen.
B PROGRAM CHANGE SETUP
Here you can specify how program changes will be
transmitted and received, and turn transmission and
reception on/off. This item is linked with the settings in
the MIDI SETUP screen.
C ECHO ON/OFF
This selects whether program changes received from an
external device are echoed-out from the MIDI trans-
mission port. This item is linked with the settings in the
MIDI SETUP screen.
PM5D/PM5D-RH Owner's Manual
1
2
3
Reference section
173