Error Messages - Yamaha TF5 User Manual

Error messages

Message
Item Already Exists. Replace it?
File Already Exists, Replace it?
Operation Failed!
Invalid Name!
Operation Ignored.
SCENE #XX is Empty!
SCENE #XX is Read Only!
Cannot Store!
Cannot Recall!
LIBRARY is Read Only!
Operation Failed. Library Memory Full.
Turn Off 1-knob Mode to Adjust.
Nothing to Paste!
Page does not exist.
Cannot Close This Popup.
Unsupported File Format!
Couldn't Write File.
File Protected!
Already Exists!
Couldn't Access File.
File Error!
Illegal IP Address!
You tried to overwrite an item in the Library.
When using Save As, the name of the file you tried to save was the same name as an existing file.
When using Save. you tried to overwrite an existing file.
An error occurred during the operation. (This is a general error.)
Name violates naming convention.
The feature assigned to the USER DEFINED KNOB could not be operated when the message was displayed.
No data is stored in the Scene you tried to recall, or the data is damaged.
You tried to overwrite a Scene that is write-protected.
Could not save the data in the Scene memory or in the library.
Could not recall the data from the Scene memory or from the library.
You tried to overwrite data in the library that is write-protected.
You tried to add data when the memory was full.
1-knob mode is enabled; turn 1-knob mode off.
You tried to paste data when the copy buffer was empty.
The page does not exist.
The popup could not be closed.
You tried to read an unsupported file format.
The file could not be saved.
Could not overwrite the file because the file is write-protected.
The name of the directory you tried to create or edit matches the name of an existing directory.
Could not access the file for some reason.
An internal file access error occurred.
The IP address setting or gateway setting is incorrect.
- 72 -
Description
Reference
User Guide
TF Editor