Yamaha PM5D Owner's Manual page 44

5
Input channel operations
Switches the sig-
nal sent from the
input channel to
the MIX bus on/
off.
Input channels
44
PM5D/PM5D-RH Owner's Manual
4 To turn off the signal sent from that channel
to a MIX bus, press the MIX [ON] key to turn it
off.
Press the MIX [ON] key once again to turn it back on.
Adjusts the send
Note
level of the signal
sent from the
input channel to
the MIX bus.
MIX bus
Operating section
MIX buses can be switched (in units of two adjacent odd-num-
bered/even-numbered MIX buses) between VARI type (send
levels are variable) and FIXED type (send levels are fixed).
(For details on switching the type ➥ p.274)
❏ When sending a signal from an input channel to
a VARI type MIX bus
INPUT CHANNEL 1
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
INPUT CHANNEL 2
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
❏ When sending a signal from an input channel to
a FIXED type MIX bus
INPUT CHANNEL 1
FADER
PAN
ON
MIX1 (FIX)
MIX2 (FIX)
INPUT CHANNEL 2
FADER
PAN
ON
MIX1 (FIX)
MIX2 (FIX)
If the send-destination MIX bus is set to FIXED mode, the MIX
encoders have no effect; the signal can only be switched on/
off by the MIX [ON] key.
......
......
ON
ON
ON
ON
......
......
ON
ON
ON
ON