Warning/Error Messages - Yamaha CL5 Reference Manual

Warning/Error Messages

Message
xxx Parameters Copied. Parameter xxx was copied to the copy buffer.
xxx Parameters Initialized.
Parameter xxx was initialized.
xxx Parameters Pasted. Parameter xxx was pasted from the copy buffer.
xxx Parameters Swapped with Copy
Parameter xxx was exchanged with the contents of the copy buffer.
Buffer.
ALTERNATE FUNCTION: Turned off!
ALTERNATE FUNCTION was turned off.
In the USER DEFINED KEYS popup of the CL3/CL1, you attempted to
Cannot Assign!
edit an item that cannot be edited for that model.
Cannot Bookmark This Popup. This popup window cannot be bookmarked.
Cannot Mount This Type of Device in You attempted to mount a specific device at a position where it cannot
This Position. be mounted.
Cannot Open This Page.
This window cannot be opened.
Cannot Paste to Different Parameter
The parameter cannot be pasted to a different type.
Type!
Cannot Paste! Cannot paste the character string.
Cannot Recall! Failed to recall a scene memory or library.
You attempted to select a channel that cannot be operated due to your
Cannot Select This Channel.
user level or some other reason.
Cannot Store! Failed to store a scene memory or library.
Cannot Undo! You pressed the UNDO button when Undo was not available.
Channel Copied.
Channel settings have been copied.
Channel Moved. Channel settings have been moved.
Channel Returned to Default Settings. Channel settings have been returned to the default settings.
All data has been initialized because the data in internal backup
Console initialized due to memory memory has been lost, due to an update or failure of the backup
mismatch. battery or some other reason. Please contact your Yamaha service
center listed at the end of the Owner's Manual (separate document).
Corrupted data fixed! The data was fixed.
Couldn't Access File.
File on the USB flash drive could not be accessed for some reason.
Couldn't Write File. File could not be saved to the USB flash drive.
Current User Changed. [xxx]
Current user was changed to [xxx].
DANTE audio resource overflow. There are insufficient audio resources on the Dante audio network.
The primary and secondary connections are incorrect in the daisy
DANTE Connection Error!
chain connections.
DANTE is not working by GIGA bit. GIGA bit is not working on the Dante audio network.
DANTE is working at Secondary.
The Dante audio network is working on a secondary port.
DANTE module Error! An error has occurred in a Dante module.
Meaning
250
Message
Different File Format! Some Data was
Data in an unsupported format was loaded.
not Loaded.
You attempted to delete a directory, but failed because there were files
Directory Not Empty!
remaining in the directory.
Editor: Data Framing Error!
Invalid signals are being exchanged with CL Editor.
Editor: Data Overrun!
Editor: Rx Buffer Full! Too much data is being received at CL Editor's input port.
Editor: Tx Buffer Full! Too much data is being sent from CL Editor's output port.
CUE was defeated because you switched from the EFFECT popup
EFFECT CUE: Turned Off.
window or the premium rack popup window to a different screen.
The network cable of a redundant secondary port has been
Error occurred at Secondary Port.
disconnected.
External HA data could not be recalled, because the state of
External HA Connection Conflict!
connections to the external HA has changed since the scene was
stored.
The PW800 (EXT) power supply connected to the CL series console
External Power Supply is Cut Off!
has stopped operating.
Fader Bank Snapshot is Done. A snapshot was taken of the current bank settings.
The following operation has not been performed yet because the USB
File Access is Busy!
flash drive is being accessed.
The USB flash drive already contains a file/directory with the same
File Already Exists!
name as the one you are attempting to save, rename, or create.
File Error [xx]!
Internal file access error
Overwriting was not possible because the file on the USB flash drive is
File Protected!
write-protected.
Flash Memory Initializing Finished. Memory initialization has been completed.
Help File Not Found! The help file has not been loaded.
Illegal Address! The IP address or gateway address settings are invalid.
Illegal DIP Switch Setting. The R series DIP switch settings are invalid.
Communication via the Network connector is not possible because
Illegal MAC Address! Cannot Use the MAC address setting has been damaged for some reason.
Ethernet. Please contact your Yamaha service center listed at the end of the
Owner's Manual (separate document).
Illegal MAC Address! The MAC Address is invalid.
The USB flash drive could not be accessed because its format is
Illegal Storage Format!
invalid or unsupported.
The internal (INT) power supply has stopped operating. Alternatively,
some other problem has occurred. Please contact your Yamaha
Internal Power Supply is Cut Off!
service center listed at the end of the Owner's Manual (separate
document).
Internal Power Supply is Turned On. The internal (INT) power supply has started up normally.
KEY IN CUE was defeated because you switched from the
KEY IN CUE: Turned Off.
DYNAMICS 1 popup window of an input channel to a different screen.
LIBRARY #xxx is Empty! No data has been stored in library #xxx that you attempted to recall.
Warning/Error Messages
Meaning
Reference Manual