Yamaha PM5D Owner's Manual page 71

5 Select one of the following as the insert I/O
point for each channel, and turn on the corre-
sponding button.
PRE EQ Immediately before the EQ
POST EQ Immediately after the EQ
PRE DELAY Immediately before the delay
POST FADER Immediately after the fader
The selected point is indicated by the graphic in the
upper part of the screen.
The INS symbol indicates the insert I/O point
for the channel at which the cursor is located.
Select the insert I/O point for
each channel.
These are the INSERT I/O ON/OFF buttons
that switch insert on/off for each channel.
These indicate the names of the input channels.
These indicate the channel numbers.
6 Click the INSERT I/O ON/OFF button for the
desired channel to turn it on.
This enables the insert connection for the correspond-
ing channel.
If you selected AD IN as the insert-in, or if you selected
a slot to which an external head amp supporting the
special protocol (Yamaha AD8HR, AD824) is con-
nected, make head amp settings as necessary (➥ p.36).
PM5D/PM5D-RH Owner's Manual
Operating section
8
71