Executing Functions Assigned To The User Defined Keys; Using The Fader Assign Function; Items In The Fader Mode Section; Assigning Channels To Dca Faders - Yamaha PM5D Owner's Manual

5 Assign functions to other keys and banks in
the same way.
Hint
The User Defined key assignments are not saved in the
scene. If desired, you can save the assignments on a mem-
ory card as USER DEFINED KEY data.

Using the Fader Assign function

"Fader Assign" is a function that lets you assign the desired channels to the DCA faders 1–8 of the DCA strip in the top panel.
For each of six layers A–F, you can specify the channel that is assigned to each fader. For example, you might use this to simul-
taneously control the send level and return level of an internal effect, or to use a fader as the master fader of a MIX bus or
MATRIX bus.
For each layer you can specify the channel that is assigned to each fader, and use the FADER MODE section to switch between
layers while you operate the faders.

Items in the FADER MODE section

In the FADER MODE section you can select the combina-
tion of channels or DCA groups that will be controlled by
DCA faders 1–8.
1
A FADER MODE [A]–[F] keys
If one of these buttons is on, DCA faders 1–8 will con-
trol the level of the channels assigned for that layer (A–
F).
B FADER MODE [DCA] key
If this button is on, DCA faders 1–8 will control DCA
groups 1–8.
Executing functions assigned to the
User Defined keys
Here's how to use the USER DEFINED [1]–[25] keys to
execute the functions that have been assigned to them.
1 In the DISPLAY ACCESS section, repeatedly
press the [UTILITY] key to access the USER
DEFINE screen.
2 In the BANK SELECT area at the upper left of
the screen, use the A–D buttons to select the
bank (A–D) you want to use.
3 Press a USER DEFINED [1]–[25] key.
The function assigned to that key will be executed.

Assigning channels to DCA faders

Here's how to assign the desired channels to the DCA fad-
ers 1–8 of the DCA strip section.
1 In the DISPLAY ACCESS section, repeatedly
press the [UTILITY] key to access the FADER
ASSIGN screen.
In this screen you can select the channel assigned to
each fader in each layer A–F.
2
PM5D/PM5D-RH Owner's Manual
FADER ASSIGN
Operating section
19
139