Event List Screen - Yamaha PM5D Owner's Manual

P DIRECT RECALL ASSIGN
This lets you select the scenes that will be directly
recalled by the SCENE MEMORY [1]–[8] keys on the
panel. This function is available if the DIRECT
RECALL button is on.
When you move the cursor to the field on the left and
turn the [DATA] encoder, or when you click the /
buttons to select a scene number, the scene name will
appear in the field on the right.
Q DIRECT RECALL/MUTE MASTER
These are linked with the DIRECT RECALL/MUTE
MASTER buttons shown at the bottom of the display.
(➥ p.151)

EVENT LIST screen

The Event List function lets you register scenes in the order
of use, so that these scenes can be recalled either manually
or automatically according to the specified time code or
interval.
EVENT LIST
1
3
A EVENT LIST ENABLE/DISABLE
Use the following three buttons to enable/disable the
Event List function.
• DISABLE
The Event List function will not recall scenes registered
in the event list.
• ENABLE [ALL MANUAL]
Scenes registered in the event list will be recalled only
by manual operation. If the list contains events for
which a time code has been specified, the candidate
event for recall will change as time code progresses, but
events will not actually be recalled unless the recall
operation is performed manually.
• ENABLE
Scenes registered in the event list will be recalled
according to the specified condition (time code, inter-
val, or manual operation).
B Event list
In this list you can register the scenes to be recalled,
and the conditions under which the scenes will be
recalled. Click a line to select the event of that line for
editing; it will be highlighted in the center of the list.
PM5D/PM5D-RH Owner's Manual
2
Reference section
161