Comp Link Assign (Compressor Link Assign) Screen - Yamaha PM5D Owner's Manual

C SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel EQ link group assignments. While the EQ
link group SET BY CUE button is on, pressing the
[CUE] key of a channel that can be assigned to the cor-
responding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
The SET BY CUE button can be turned on for only one EQ
link group. This is automatically turned off when you change
screens or turn off the power.
D CLEAR
This button clears all input channels assigned to that
EQ link group.
3 4
PM5D/PM5D-RH Owner's Manual
COMP LINK ASSIGN (Compressor link
assign) screen
Here you can specify the input channels that will be
assigned to compressor link groups 1–8. Compressor
parameters are linked for channels belonging to the same
group.
COMP LINK ASSIGN
Except for the fact that these settings apply to input chan-
nels, the display and operations are the same as in the
OUTPUT DCA/GROUP function COMP LINK ASSIGN
screen. Refer to p.237.
Hint
Input channels and output channels use separate compres-
sor link groups. Input channels use groups A–H, and output
channels use groups 1–8.
Reference section
273