Yamaha PM5D Owner's Manual page 276

PAN/ROUTING function
❏ Type = VARI, Pairing = disabled
Input channel 1
Input channel 1
MIX bus 1
PRE/POST button
Selects either PRE (pre-EQ or pre-fader) or
POST (post ON or post TO ST) as the loca-
tion from which the signal will be sent from
input channels to each MIX bus.
SEND ON/OFF button
On/off switch for the signal sent from input
channels to each MIX bus.
• PRE/POST button= PRE
INPUT CHANNEL 1
FADER
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
• PRE/POST button= POST
INPUT CHANNEL 1
FADER
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
276
PM5D/PM5D-RH Owner's Manual
Input channel 2
↓ ↓
MIX bus 2 MIX bus 2
Input channel 2
↓ ↓
MIX bus 1
SEND LEVEL knob
Adjusts the level of the signal sent from
input channels to each MIX bus.
......
......
PAN
ON
ON
......
......
PAN
ON
ON
Reference section
❏ Type = VARI, Pairing = enabled
Input channel 1
↓
MIX buses 1/2
SEND ON/OFF SEND LEVEL knob
button Adjusts the level of the signal
On/off switch for sent from input channels to the
the signal sent two MIX buses.
from input chan-
nels to the two MIX PAN/BALANCE knob
MIX buses.
Specifies the panning of the signal sent
from input channels to the two MIX
buses. If the PAN MODE (
input channel is set to BALANCE, this
functions as a BALANCE knob that
adjusts the volume balance between
the two channels.
PRE/POST button
Selects either PRE (pre-EQ or pre-fader) or POST
(post ON or post TO ST) as the location from which the
signal will be sent from input channels to each MIX bus.
• PRE/POST button= PRE
INPUT CHANNEL 1
FADER
PAN
ON
MIX1/2 (VARI)
LEVEL PAN
• PRE/POST button= POST
INPUT CHANNEL 1
FADER
PAN
ON
MIX1/2 (VARI)
LEVEL PAN
Input channel 2
↓
MIX buses 1/2
9
) of the
......
......
ON
......
......
ON