Yamaha PM5D Owner's Manual page 196

UTILITY function
4
D Mode
Here you can select the mode in which files will be
loaded. If a file other than CSV is selected in the file list,
you will be able to select BASIC mode or ADVANCED
mode. (The CSV button will be grayed-out and
unavailable.)
If a CSV file or directory is selected in the file list, CSV
IMPORT mode will be selected automatically. (The
BASIC and ADVANCED buttons will be grayed-out
and unavailable.)
The right side of the screen will change as follows
according to the currently selected mode.
❏ BASIC mode
In BASIC mode you can load all scene memory and
library data (or just a selected portion of data) from a
card. If BASIC is selected, the right side of the screen
will show the following items.
BASIC button
5
6
E Select the data to be loaded
Here you can select the data that will be loaded. The
contents of each item are the same as in BASIC mode
of the SAVE screen (➥ p.192). However, the items that
can be selected will depend on the currently selected
file. Buttons for items that cannot be loaded will be
grayed-out and unavailable.
If the SCENE MEMORY, HA, INPUT PATCH, or
OUTPUT PATCH button is on, you restrict the scenes
or library items that will be loaded by using the box at
the right to specify the starting number and ending
number.
Hint
If the data saved on the card includes empty scenes or library
items, the corresponding scenes or library items will be empty
when the data is loaded.
F LOAD
This button loads the data selected in the left side of the
screen into the parameters you specify. When you click
196
PM5D/PM5D-RH Owner's Manual
this button, a message will ask you to confirm the Load
operation. (This is common to all modes.)
❏ ADVANCED mode
In this mode you can select either scene memory or a
library, specify a starting number and ending number, and
load the specified range of data from the card.
7
8
9
G CATEGORY
This indicates the type of data (scene memory or
library) saved in the currently selected file.
H SOURCE (load-source)
This area shows the starting and ending number (and
the corresponding scene names or library titles) of the
scene memories or library items that will be loaded
from the card. Click the
right of each box to change the number.
I DESTINATION (load-destination)
If you've changed the starting number of the load-des-
tination, this area shows the starting and ending
number (and the corresponding scene names or library
titles) of the PM5D's internal scene memories or
library items into which the data selected in the
SOURCE area will be loaded. To edit the setting, click
the
starting number box. (The ending number value will
change automatically as you edit the starting number.)
Memory card
002
003
004
005
006
Hint
• Even if you've selected data that was saved in BASIC mode,
you can switch to ADVANCED mode and load only specific
numbers.
• However, an exception is that if the selected data was saved
as ALL DATA or SCENE MEMORY+LINKED LIBRARY in
BASIC mode, the ADVANCED button will be grayed-out,
and you will not be able to switch to ADVANCED mode.
Reference section
ADVANCED button
/ buttons at the left and
/ buttons located at the left and right of the
Starting
number
BBB 011 BBB
CCC 012 CCC
➠
DDD 013 DDD
EEE 014 EEE
Ending
FFF
number
PM5D