ST IN/FX RTN channel strip
In this section you can control the ST IN channels and FX RTN channels.
This section is layered as shown in the diagram below; choose the ST IN layer when you want to control the ST IN channels,
or the FX RTN layer when you want to control the FX RTN channels.
Items in the ST IN/FX RTN channel
strip
1
5
6
7
8
9
ST IN 1-4 layer
FX RTN 1-4 layer
A [ST IN 1-4]/[FX RTN 1-4] keys
These keys select the layer that will be controlled by the
ST IN/FX RTN channel strip. Press the [ST IN 1-4] key
to control ST IN channels 1–4, or press the [FX RTN 1-
4] key to control FX RTN channels 1–4.
2 – P below are the same as in the INPUT channel
Items
strip (➥ p.37). However since FX RTN channels do not
have a gate or compressor, the [GATE] LED (
3
K ) are not used.
[COMP] LED (
2
B [PRE] key
4
C ENCODER [ON] key
D Encoder
J
K
E [SEL] key
L
F Name indicator
G CH [ON] key
H Fader
M
I [CUE] key
J [TO ST] LED
K [COMP] LED
N
L [GATE] LED
M Meter LEDs
N DCA assign LEDs
O
O MUTE assign LEDs
P [RCL SAFE]/[MUTE SAFE] LEDs
P
PM5D/PM5D-RH Owner's Manual
L ) and
Operating section
5
39