Set Input Source Color - NovaStar VX1000 User Manual

Figure 5-17 Standard resolution
Step 8 Rotate the knob to select Apply and press the knob to complete the standard resolution settings.
Custom Resolution
Step 1 On the input settings screen, select the desired input source and press the knob to enter the input resolution
settings screen.
Step 2 Select EDID and press the knob to enter the EDID settings screen.
Step 3 Set the EDID mode to Custom.
Step 4 Rotate the knob to select Width and press the knob to confirm. Rotate the knob again to select the desired
width and press the knob to confirm.
Step 5 Rotate the knob to select Height and press the knob to confirm. Rotate the knob again to select the desired
height and press the knob to confirm.
Step 6 Rotate the knob to select Frame Rate and press the knob to show the frame list. Rotate the knob again to
select the desired frame rate and press the knob to confirm.
Figure 5-18 Custom resolution

5.4.2 Set Input Source Color

On the input settings screen, select the desired input source and press the knob to enter the input resolution
settings screen. Rotate the knob to select Input Color and press the knob to enter the input color settings
screen. The color parameter descriptions are shown in
www.novastar.tech
VX1000 All-in-One Controller User Manual
Table 5-3.
21