Kenwood KCL95 Instructions Manual page 21

Hide thumbs Also See for KCL95:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Ecodesign Information
Network Port: Single WiFi network port, activated by default.
Model No.:
RF Frequency Range:
Maximum Transmit Power:
Communications Protocol: IEEE802.11 b, g, n
The KCL95 has a single WiFi network port and is intended for use as remotely operated, network equipment.
The Network Port can be deactivated in the WiFi settings menu and selecting "Off".
The Network Port can be re-activated in the WiFi settings menu and selecting "On".
Mode
Non-Networked On – Display screen shows the time, speed, temperature screen
Non-Networked Standby – After 20 mins of inactivity display screen turns off. WiFi network port de-activated.
Networked On – Display screen shows the time, speed, temperature screen. WiFi network port activated.
Networked Standby – After 20 mins of inactivity display screen turns off and all WiFi network ports remain activated. Power
consumption 0.8W.
Off - Activated by switch on rear of unit.
Reactivation: The appliance can be reactivated from standby mode by;
From networked standby: Touch the display screen, rotate the control dial or remotely via the App.
From non-networked standby: Touch the display screen, rotate the control dial.
The bowl and lid should always be kept fitted to the main unit so that it can be operated remotely.
Factory Reset - Important
When disposing of the appliance, it is important to factory reset it to protect your personal data. Selecting this option will erase all
WiFi data stored on the appliance and restore it to factory settings. To factory reset your appliance, select Settings> Factory Reset.
WEBSITE
Modes
Non-Networked On - Display screen shows the time, speed and temperature screen.
Non-Networked Standby - After 20 mins of inactivity display screen turns off. WiFi
network port de-activated.
Networked On - Display screen shows the time, speed and temperature screen. WiFi
network port activated.
Networked Standby - After 20 mins of inactivity display screen turns off and all WiFi
network ports remain activated.
Off -Activated by switch on rear of unit.
(Nemko to confirm Power Consumption to 1dp)
17
TYPE KCL95
2412 - 2472 MHz
< 20 dBm
Power consumption
N/A
0.2W
N/A
0.8W
0.0W

Advertisement

Table of Contents
loading

Table of Contents