Si Safe Cams - Siemens SINUMERIK MC Commissioning Manual

7.4.8

SI Safe Cams

In the "SI safe cams" diagnostic screen, the following information about the Safe Cam (SCA)
safety function of the selected drive is displayed:
● Status of the function (SCA)
For the selected drive, indicates whether the "Safe Cam" (SCA) safety function has been
selected, is active and is valid. The actual position is also displayed (actual value on the load
side on the CU).
● Status of the enabled cams
For each configured and enabled cam, displays the identifier, the minus and plus positions
- as well as the validity of the cam position.
Call
MENU SELECT > Diagnostics > Menu forward key > Safety > Menu forward key >SI cams
Figure 7-13
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB
7.4 Diagnostic functions in the SINUMERIK ONE Commissioning Tool
Inactive
Active
Invalid. Safe referencing was not carried out.
Cam position is reached and the cam is invalid.
Cam position is reached and the cam is valid. Safe referencing was carried out.
"SI safe cams" diagnostics screen
Diagnostics
323