Siemens SINUMERIK MC Commissioning Manual page 4

Preface
Target group
This document addresses commissioning engineers who wish to commission a SINUMERIK
MC in conjunction with a SINAMICS S120 drive and use Safety Integrated Functions.
Benefits
The intended target group can use the commissioning manual to test and commission the
product, system or the plant correctly and safely.
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
For the sake of simplicity, this documentation does not contain all detailed information about all
types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Note regarding the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the principle of privacy by
design. That means that
this product does not process / store any personal data, only technical functional data (e.g. time
stamps). If a user links this data with other data (e.g. a shift schedule) or stores personal data
on the same storage medium (e.g. hard drive) and thus establishes a link to a person or
persons, then the user is responsible for ensuring compliance with the relevant data protection
regulations.
Technical Support
Country-specific telephone numbers for technical support are provided on the Internet at the
following address (https://support.industry.siemens.com/sc/ww/en/sc/2090) in the "Contact"
area.
If you have any technical questions, use the online form in the "Support Request" area.
Notation used
The following notation and abbreviations are used in this documentation:
Synonyms of terminology used
This documentation uses terms "Safety technology" and "F-technology" synonymously. The
same applies to terms "failsafe" and "F-" process.
4
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB