Installing The Fail-Safe System; Software Components - Siemens SIMATIC PCS 7 Operating Manual

Installing the fail-safe system

4.1

Software components

This documentation is based on PCS 7 version V8.2 and the following additional software
components:
● S7 F-Systems
– S7 F Configuration Pack V5.5 SP12
– S7 F-Systems V6.1 SP2
– S7 F-Systems Lib V1_3 SP1 Upd. 1
– S7 F-Systems HMI V6.1 SP2
● Safety Matrix
– Safety Matrix Engineering Tool V6.2 SP2
– Safety Matrix Viewer V6.2 SP2
– Safety Matrix AS-OS Engineering V6.2 SP3
A "S7 F-Systems RT License" is also required for operating a safety-related automation
system.
All SIMATIC software must be closed during the installation process.
Note
You can find more information in the following manuals:
• S7 F/FH Systems Configuring and Programming
(https://support.industry.siemens.com/cs/ww/en/view/101509838)
• Industrial Software Safety Matrix
(https://support.industry.siemens.com/cs/ww/en/view/100675874)
Compendium Part B - Process Safety (V8.2)
Operating Manual, 07/2016, A5E35031794-AB
4
11