Mounting - WAGO 750-564 Manual

50

Mounting

5 Mounting
Do not work when devices are energized!
High voltage can cause electric shock or burns.
Switch off all power to the device prior to performing any installation, repair or
maintenance work.
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury. Do not touch the blade contacts.
Do not contaminate contacts!
Contamination may negatively impact the functionality of data and power jumper
contacts. Do not touch the contacts. Avoid contaminating the contacts.
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Pay attention to potential equalization from the environment!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, please ensure that
environmental factors (personnel, work space and packaging) are properly
equalized. Do not touch any conducting parts, e.g., data contacts.
Follow the installation instructions!
Only install this device in dry, indoor rooms.
Do not install the device on or in the vicinity of easily flammable materials!
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-564 4AO U/I