WAGO 750-517/040-000 Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. Control Unit
  5. 750-517/040-000
  6. Manual

WAGO 750-517/040-000 Manual

2do 230v ac 1.0a/ relay 2co /xtr 2-channel relay output module 230 vac, 1.0 a, 2 changeover contacts /xtr for wago-i/o-system 750 xtr
Hide thumbs
Table of Contents

  • Deutsch
    • Table of Contents
    • Validity of this Documentation
    • Copyright
    • Notes about this Documentation
    • Symbols
    • Number Notation
    • Font Conventions
    • Table 1: Number Notation
    • Table 2: Font Conventions
    • Personnel Qualifications
    • Use of the 750 Series in Compliance with Underlying Provisions
    • Subject to Changes
    • Legal Bases
    • Important Notes
    • Technical Condition of Specified Devices
    • Disposal
    • 2.1.4.1.1 Electrical and Electronic Equipment
    • 2.1.4.1.2 Packaging
    • Safety Advice (Precautions)
    • Device Description
    • View
    • Figure 1: View
    • Table 3: Legend for Figure "View
    • Connectors
    • Data Contacts/Local Bus
    • Figure 2: Data Contacts
    • Table 4: Legend for Figure "CAGE CLAMP ® Connectors
    • Figure 3: CAGE CLAMP ® Connectors
    • Power Jumper Contacts/Field Supply
    • CAGE CLAMP ® Connectors
    • Display Elements
    • Operating Elements
    • Figure 4: Display Elements
    • Table 5: Legend for Figure "Display Elements
    • Schematic Diagram
    • Figure 5: Schematic Diagram
    • Table 6: Technical Data - Device
    • Table 7: Technical Data - Supply
    • Table 8: Technical Data - Communication
    • Communication
    • Supply
    • Device Data
    • Technical Data
    • Table 13: Technical Data - Mechanical Conditions
    • Table 12: Technical Data - Data Contacts
    • Table 11: Technical Data - Power Jumper Contacts
    • Table 10: Technical Data - Field Wiring
    • Table 9: Technical Data - Outputs
    • Mechanical Conditions
    • Connection Type
    • Outputs
    • Climatic Environmental Conditions
    • Load Limiting Curve
    • Figure 6: Load Limiting Curve of the Relay
    • Table 14: Technical Data - Climatic Environmental Conditions
    • Approvals
    • Table 15: Standards and Rated Conditions for Explosion Protection Applications
    • Standards and Guidelines
    • Table 16: Climatic and Mechanical Environmental Conditions and
    • Table 17: EMC - Immunity to Interference
    • Table 18: EMC - Emission of Interference
    • Table 19: Standards and Rated Conditions for Rail Applications (en 50155)
    • Process Image
    • Table 20: Output Bits
    • Mounting
    • Mounting Sequence
    • Inserting and Removing Devices
    • Inserting the I/O Module
    • Figure 7: Insert I/O Module (Example)
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Removing the I/O Module
    • Connect Devices
    • Connecting a Conductor to the CAGE CLAMP
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Connection Examples
    • 1-Wire Connection, Protection Class I Actuators
    • 1-Wire Connection, Protection Class II and III Actuators
    • Figure 11: Connection Example, 1-Wire Connection for Protection Class I
    • Figure 12: Connection Example 1-Wire Connection for Protection Class II (Double Insulated) and Class III (Safety Extra-Low Voltage) Actuators
    • Operating the Relay in Separate Current Circuits
    • Figure 13: Connection Example - Separate Current Circuits
    • Operating the Relay in Series Connection
    • Figure 14: Connection Example - Series Connection
    • Table 21: Protective Circuits for Contacts of Relay Modules
    • Figure 18: Varistor
    • Figure 16: Zener Diode and Diode
    • Figure 17: Suppressor Diode
    • Protective Circuits for Contacts of Relay Modules
    • Figure 15: Diode
    • Figure 19: R/C Combination
    • Use in Hazardous Environments
    • Marking Configuration Examples
    • Marking for Europe According to ATEX and Iecex
    • Figure 20: Marking Example According to ATEX and Iecex
    • Figure 21: Text Detail - Marking Example According to ATEX and Iecex
    • Table 22: Description of Marking Example According to ATEX and Iecex
    • Figure 22: Marking Example for Approved Ex I I/O Module According to
    • Figure 23: Text Detail - Marking Example for Approved Ex I I/O Module
    • Table 23: Description of Marking Example for Approved Ex I I/O Module According to ATEX and Iecex
    • Table 25: Description of Marking Example for Approved Ex I I/O Module
    • Table 24: Description of Marking Example According to NEC 500
    • Marking for the United States of America (NEC) and Canada (CEC)
    • Figure 25: Text Detail - Marking Example According to NEC 500
    • Figure 24: Marking Example According to NEC
    • Figure 26: Text Detail - Marking Example for Approved Ex I I/O Module
    • Figure 27: Text Detail - Marking Example for Approved Ex I I/O Module
    • Table 26: Description of Marking Example for Approved Ex I I/O Modules
    • Figure 28: Text Detail - Marking Example for Approved Ex I I/O Modules
    • Table 27: Description of Marking Example for Approved Ex I I/O Modules
    • Installation Regulations
    • Special Notes Regarding Explosion Protection
    • Special Notes Regarding ANSI/ISA Ex

  • English

Advertisement

Quick Links

Download this manual
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband Fronts eite - H andbuc h; CI 2017; mit DocVariablen (Standar d) @ 28\mod_1486477502910_0.doc x @ 405388 @ @ 1
Manual
WAGO-I/O-SYSTEM 750 XTR
750-517/040-000
2DO 230V AC 1.0A/ Relay 2CO /XTR
2-Channel Relay Output Module 230 VAC, 1.0 A,
2 Changeover Contacts /XTR
Version 1.3.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 750-517/040-000 and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO 750-517/040-000

Summary of Contents for WAGO 750-517/040-000

  • Page 1 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband Fronts eite - H andbuc h; CI 2017; mit DocVariablen (Standar d) @ 28\mod_1486477502910_0.doc x @ 405388 @ @ 1 Manual WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR 2-Channel Relay Output Module 230 VAC, 1.0 A,...
  • Page 2 WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR © 2019 WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 –...

  • Page 3: Table Of Contents

    WAGO-I/O-SYSTEM 750 XTR Table of Contents 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 5 /D okumentati on allgemein/Verzeic hnisse/Inhalts verz eichnis - Ü berschrift oG und Verzei chnis @ 3\mod_1219151230875_21.doc x @ 21063 @ @ 1 Table of Contents Notes about this Documentation .............
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Connect Devices ..................38 ® Connecting a Conductor to the CAGE CLAMP ........38 Connection Examples ................40 6.2.1 1-Wire Connection, Protection Class I Actuators ......40 6.2.2...

  • Page 5: Notes About This Documentation

    Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on ( alte Struktur)/Gül tigkeits ber eich/Gültig kei tsbereic h D okumentati on I/O-Modul 750-xxxx, ohne Variantenang abe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1...

  • Page 6: Symbols

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/Symbol e - Ü berschrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.3.0...

  • Page 8: Number Notation

    WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 12.7 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/D arstellung der Z ahlens ys teme - Ü bers chrift 2 @ 23\mod_1435647128078_21.doc x @ 184811 @ 2 @ 1 Number Notation Pos : 12.8 /All e Seri en ( Allgemei ne Module)/R ec htliches , Allgemei nes /Zahlens ysteme @ 3\mod_1221059454015_21.doc x @ 21711 @ @ 1...

  • Page 9: Important Notes

    Pos : 15.6 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Besti mmungsg emäß e Ver wendung/Besti mmungsgemäße Ver wendung 750- xxxx für Geräte - STD - mi t EN 61000-6- 3 @ 3\mod_1224064151234_21.doc...

  • Page 10: Technical Condition Of Specified Devices

    These modules contain no parts that can be serviced or repaired by the user. The following actions will result in the exclusion of liability on the part of WAGO Kontakttechnik GmbH & Co. KG: •...

  • Page 11: 2.1.4.1.2 Packaging

    WAGO-I/O-SYSTEM 750 XTR Important Notes 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Environmentally friendly disposal benefits health and protects the environment from harmful substances in electrical and electronic equipment. • Observe national and local regulations for the disposal of electrical and electronic equipment.

  • Page 12: Safety Advice (Precautions)

    Important Notes WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 15.11 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2/Sicherheits hinweis e - Ü bers chrift 2 @ 6\mod_1260180299987_21.doc x @ 46724 @ 2 @ 1 Safety Advice (Precautions) Pos : 15.12 /Alle Serien (Allgemeine M odul e)/Sic herheits- und sonstige Hinweis e/Ei nlei tung Sic herheits hinweise Har dwar e @ 6\mod_1260180170493_21.doc x @ 46720 @ @ 1...
  • Page 13 Pos : 15.16.1 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en (alte Struktur)/Sic her heits- und s ons tige Hi nweis e/Ac htung/Ac htung: Ei nwandfrei e Kontakti erung z ur Tragsc hiene gewährl eisten! @ 34\mod_1550481407638_21.doc...
  • Page 14 Pos : 15.17 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Ac htung/Ac htung: XTR - Is olationspr üfung en mit DC durchführen! @ 15\mod_1370843209441_21.doc...

  • Page 15: Device Description

    Pos : 18.4 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ei nleitung/I/O-Besc hrei bung/Allgemein/Ver weis auf Kapi tel " Ger äte ans chli eßen" > " Ansc hluss beispi el(e)" @ 5\mod_1246015203281_21.doc x @ 36298 @ @ 1...
  • Page 16 I/O modules. Pos : 18.15 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Hi nweis/Hinweis: XTR - Er höhte Störfestig keit @ 15\mod_1367496424993_21.doc x @ 118330 @ @ 1...

  • Page 17: View

    Figure 1: View Pos : 22 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ansic ht/Ansicht C ageClamp® _Legende mi t LEDs _ohne Leistungs kontakte @ 16\mod_1371816091053_21.doc x @ 124052 @ @ 1 Table 3: Legend for Figure “View”...

  • Page 18: Connectors

    Data Contacts/Local Bus Pos : 26.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ansc hlüs se/Datenkontakte - Fel dbus koppl er/-c ontroller und Modul e – Abbildung und Besc hrei bung @ 3\mod_1231771259187_21.doc x @ 26002 @ @ 1 Communication between the fieldbus coupler/controller and the I/O modules as well as the system supply of the I/O modules is carried out via the local bus.

  • Page 19: Power Jumper Contacts/Field Supply

    The I/O module 750-517/040-000 has no power jumper contacts. Pos : 30.1 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Hinweis/Hi nweis : Potenti alei nspeis emodul ei ns etz en! ( keine LK) @ 3\mod_1226499089640_21.doc x @ 25026 @ @ 1...

  • Page 20: Display Elements

    Pos : 35 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Anzeig eel emente - Ü berschrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 36 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Anz eigeel emente/D O/Anzeigeelemente 750-0517 2 R O ( Agn, Egn) @ 16\mod_1372343976705_21.doc x @ 125054 @ @ 1 Figure 4: Display Elements Table 5: Legend for Figure “Display Elements”...

  • Page 21: Schematic Diagram

    Pos : 40 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Sc hematis ches Sc haltbild - Ü bersc hrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1 Schematic Diagram Pos : 41 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Sc hematische Sc hal tbilder/D O/Schematisc hes Schaltbild 750- 0517/0040- 0000 @ 16\mod_1372414635435_21.doc x @ 125121 @ @ 1 Figure 5: Schematic Diagram Pos : 42 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 22: Technical Data

    Pos : 43 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Tec hnische D aten - Ü bersc hrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1 Technical Data Pos : 44.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Technisc he Daten/VS (Variabl ensteuerung)/Technisc he Daten Ger ät ( VS) - XTR @ 15\mod_1369311215011_21.doc x @ 120260 @ 3 @ 1 3.6.1 Device Data Table 6: Technical Data –...

  • Page 23: Outputs

    Follow the installation instructions Pos : 44.5 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Technisc he Daten/VS (Variabl ensteuerung)/Technisc he Daten kli matisc he U mwel tbedi ngungen (VS) - XTR @ 15\mod_1369387559187_21.doc x @ 120360 @ 3 @ 1 Manual Version 1.3.0...

  • Page 24: Climatic Environmental Conditions

    E-DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) Pos : 45 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Technisc he Daten/D O/T ec hnisc he D aten 750-,753- 0517_Lastgrenz kur ve @ 16\mod_1372149343907_21.doc x @ 124270 @ 2 @ 1...

  • Page 25: Approvals

     DOWNLOADS  Documentation  System Description. Pos : 48.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Zul ass ung en/Allgemein/Zul ass ung en I/O-Modul 750- xxxx Allgemei n, ohne Vari antenangabe - Einl eitung @ 4\mod_1237460656921_21.doc x @ 28643 @ @ 1 The following approvals have been granted to 750-517/040-000 I/O modules: Pos : 48.3 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...
  • Page 26 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 48.12 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung (alte Struktur)/Z ulassungen/Sc hiff/Ei nleitungss ätze/Zul ass ung en I/O-Modul 750- xxxx Schi ff, ohne Variantenang abe - Einl eitung @ 4\mod_1237190918453_21.doc x @ 28420 @ @ 1...

  • Page 27: Standards And Guidelines

    “nC” level of protection Pos : 50.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men und Richtlini en XTR - Mec hani k und Kli ma Komponenten-HB 2017 @ 30\mod_1505808045352_21.doc x @ 461389 @ @ 1 Manual Version 1.3.0...

  • Page 28: Table 16: Climatic And Mechanical Environmental Conditions And

    Device Description WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Table 16: Climatic and Mechanical Environmental Conditions and Shipbuilding Standard Test Value Transport EN 60870-2-2 Ct2(2k4) (except precipitation/water/moisture) Mechanical Environmental Conditions EN 61850-3 Achieved EN 60870-2-2 EN 60721-3-1...

  • Page 29: Table 17: Emc - Immunity To Interference

    Pos : 50.5 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/EM V-Nor men I/O-M odul 750- xxxx/0040- 0000, nur Standar dversi on - Ei nlei tung XTR @ 18\mod_1395909426189_21.doc...
  • Page 30 The list of ship certifications issued is available in the section “Approvals”. Pos : 50.7 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men Störauss endung XTR @ 18\mod_1394087664442_21.doc x @ 147358 @ @ 1 Manual Version 1.3.0...

  • Page 31: Table 18: Emc - Emission Of Interference

    WAGO-I/O-SYSTEM 750 XTR Device Description 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Table 18: EMC – Emission of Interference Standard Test Value Enclosure Emission of Interference • EN 61000-6-3 30 dB(µV/m), QP, 30 MHz … 230 MHz • EN 55022 Class B 37 dB(µV/m), QP, 230 MHz …...

  • Page 32: Table 19: Standards And Rated Conditions For Rail Applications (En 50155)

    EMC A or EMC B). Pos : 50.8 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men und Ei ns atz beding ung en für Bahnanwendungen (EN 50155) XTR @ 28\mod_1486482984774_21.doc x @ 405384 @ @ 1...

  • Page 33: Process Image

    Process Image Pos : 53 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Lokalbus/Hi nweis: Proz ess abbil dmappi ng abhängig von F BK/PFC , ohne Status-/Contr olbyte XTR @ 18\mod_1396511070508_21.doc x @ 150676 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variations in the process image depends on the fieldbus coupler/controller used.

  • Page 34: Mounting

    I/O modules with fewer power contacts. Pos : 57.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Vorsic ht/Vorsic ht: Verletz ungsgefahr durc h sc harfkantige M esser kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.

  • Page 35: Inserting And Removing Devices

    Pos : 57.10 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Ac htung/Ac htung: XTR nic ht unter -20 °C verdrahten oder umstec ken @ 15\mod_1367559895186_21.doc...

  • Page 36: Figure 8: Snap The I/O Module Into Place (Example)

    (if any) to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are established. Pos : 57.12 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/XTR-I/O-Modul entfernen @ 28\mod_1486551166032_21.doc x @ 405491 @ 3 @ 1 Manual...

  • Page 37: Removing The I/O Module

    WAGO-I/O-SYSTEM 750 XTR Mounting 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab. Figure 9: Removing the I/O Module (Example) Electrical connections for data or power jumper contacts are disconnected when removing the I/O module.

  • Page 38: Connect Devices

    Check if the voltage is positively isolated. Pos : 61 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...

  • Page 39: Figure 10: Connecting A Conductor To A Cage Clamp

    Pos : 63 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und sonstige Hinweis e/Achtung/Ac htung: Kei ne Ver wendung von unterschi edlichen Phasen eines Dr ehstromnetz es an bei den Kanälen @ 22\mod_1425393912913_21.doc...

  • Page 40: Connection Examples

    Pos : 65 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Ansc hluss beispi ele - Übersc hrift 2 @ 4\mod_1240996036328_21.doc x @ 32010 @ 2 @ 1 Connection Examples Pos : 66 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgänge/Ansc hlus sbeispi ele 750-0517_2D O_1L_0LK @ 22\mod_1425472310531_21.doc x @ 176734 @ 33 @ 1 6.2.1...

  • Page 41: Operating The Relay In Separate Current Circuits

    750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 68 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgänge/Ansc hlus sbeispi ele 750-0517_getr ennte_Str omkreis e + R ei hensc hal tung @ 23\mod_1440683248412_21.doc x @ 190457 @ 33 @ 1 6.2.3...

  • Page 42: Operating The Relay In Series Connection

    Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR 6.2.4 Operating the Relay in Series Connection Figure 14: Connection Example – Series Connection In this connection example, the channels of the I/O module are in series connection.

  • Page 43: Protective Circuits For Contacts Of Relay Modules

    750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 70 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalausgänge/Kontaktsc hutz besc haltung für R elais kl emmen @ 12\mod_1339677705690_21.doc x @ 97510 @ 2 @ 1 Protective Circuits for Contacts of Relay Modules Switching off inductive loads such as contactors and solenoid valves can generate transients with voltage peaks of up to several thousand volts.

  • Page 44: Figure 19: R/C Combination

    Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Table 21: Protective Circuits for Contacts of Relay Modules Protective Circuits Additional Defined Bipolar Advantages and Off-Delay Induction Effective Disadvantages Voltage Attenuation Limitation Advantages: • HF attenuation via power storage •...

  • Page 45: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 72.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas and shall be used in accordance with the marking and installation regulations.

  • Page 46: Marking Configuration Examples

    Marking for Europe According to ATEX and IECEx Pos : 72.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV07_2017 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 20: Marking Example According to ATEX and IECEx Figure 21: Text Detail –...

  • Page 47: Table 22: Description Of Marking Example According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Table 22: Description of Marking Example According to ATEX and IECEx Marking Description TUEV 07 ATEX 554086 X Approving authority resp. certificate numbers IECEx TUN 09.0001 X...

  • Page 48: Figure 22: Marking Example For Approved Ex I I/O Module According To

    750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 72.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV12_Ex i_2017 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 22: Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Figure 23: Text Detail –...

  • Page 49: Table 23: Description Of Marking Example For Approved Ex I I/O Module According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Table 23: Description of Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Marking Description TUEV 12 ATEX 106032 X Approving authority resp. certificate numbers...

  • Page 50: Marking For The United States Of America (Nec) And Canada (Cec)

    Figure 24: Marking Example According to NEC Pos : 72.11 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 500_2017 @ 14\mod_1360580302684_21.doc x @ 111353 @ @ 1 Figure 25: Text Detail – Marking Example According to NEC 500...

  • Page 51: Figure 26: Text Detail - Marking Example For Approved Ex I I/O Module

    750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 72.13 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 505_2017 @ 29\mod_1497865583500_21.doc x @ 424739 @ @ 1 Figure 26: Text Detail – Marking Example for Approved Ex i I/O Module According to NEC 505...

  • Page 52: Figure 28: Text Detail - Marking Example For Approved Ex I I/O Modules

    750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 72.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail C EC_2017 @ 29\mod_1497865583297_21.doc x @ 424736 @ @ 1 Figure 28: Text Detail – Marking Example for Approved Ex i I/O Modules According to CEC 18...

  • Page 53: Installation Regulations

    Special Notes Regarding Explosion Protection Pos : 72.21.2 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/Besonder e Hi nweis e hinsic htlic h Explosi onssc hutz_2017 @ 29\mod_1491556994025_21.doc x @ 415448 @ @ 1 The following warning notices are to be posted in the immediately proximity of the WAGO-I/O-SYSTEM 750 (hereinafter “product”):...
  • Page 54 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...

  • Page 55: Special Notes Regarding Ansi/Isa Ex

    Special Notes Regarding ANSI/ISA Ex Pos : 72.21.5 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/AN SI/ISA gemäß U L Fil e E198726_2017 @ 29\mod_1491557259544_21.doc x @ 415451 @ @ 1 For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements apply: •...

  • Page 56: List Of Figures

    WAGO-I/O-SYSTEM 750 XTR 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 74 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View ....................17...

  • Page 57: List Of Tables

    WAGO-I/O-SYSTEM 750 XTR List of Tables 750-517/040-000 2DO 230V AC 1.0A/ Relay 2CO /XTR Pos : 76 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ...................
  • Page 58 Pos : 78 /D okumentation allgemei n/Einband/Einband R üc ks eite - alle D okumente; CI 2017 @ 28\mod_1486477503580_21.doc x @ 405394 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D - 32385 Minden Hansastraße 27 • D - 32423 Minden Phone: +49 571 887 –...

Table of Contents