Parameterization Dialog; Figure 18: I/O Module Parameterization Dialog - WAGO 750-564 Manual

62 Commissioning
7.1.2

Parameterization Dialog

To open specific parameterization dialogs for the I/O Module 750-564, proceed
as follows:
1. Leave control mode by clicking the [Control-Mode] menu item again.
The current status of the indicator is no longer displayed, and the
[Settings] menu item can now be enabled.
2. Click the [Settings] menu item again.
The parameterization dialog appears, which forms the basis for the following
description.
The parameterization dialog is divided into the following areas:

Figure 18: I/O Module Parameterization Dialog

1 Title bar with the position and indication of the selected I/O module
2 Information bar including item number, name, version number and version
date of the I/O module
3 Buttons
Menu
4
Application area with the parameters
5
Status bar
6
The individual areas are explained in more detail in the following sections.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-564 4AO U/I