Inserting And Removing Devices; Inserting The I/O Module; Figure 7: Inserting I/O Module (Example); Figure 8: Snap The I/O Module Into Place (Example) - WAGO 750-564 Manual

52 Mounting
5.2

Inserting and Removing Devices

5.2.1

Inserting the I/O Module

1. Position the I/O module in such a way that the groove and spring are
connected to the preceding and following components.

Figure 7: Inserting I/O Module (Example)

2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.

Figure 8: Snap the I/O Module into Place (Example)

3. Check that the I/O module is seated securely on the carrier rail and in the
assembly. The I/O module must not be inserted crooked or askew.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-564 4AO U/I