Connection Examples; Figure 11: Connection Example - 2-Conductor Connection Current/Voltage - WAGO 750-564 Manual

56 Connect Devices
6.2

Connection Examples

Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Figure 11: Connection Example – 2-Conductor Connection Current/Voltage Output
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-564 4AO U/I