Figure 27: Example Of Optional "Profienergy Parameters" Dialog With; Table 57: Device-Specific Parameters And Specific Module/Channel - WAGO 750-564 Manual

WAGO-I/O-SYSTEM 750
750-564 4AO U/I
Figure 27: Example of Optional "PROFIenergy Parameters" Dialog with PROFINET IO
7.3.2.3 All PROFIBUS DP and PROFINET IO Fieldbus Couplers
The following assignment applies to the parameters of the I/O module in
connection with the use of WAGO-I/O-CHECK as well when using PROFIBUS
DP and PROFINET IO fieldbus devices.
Table 57: Device-Specific Parameters and Specific Module/Channel Parameters
GSD File
Name
Synchronous
D/A conversion
[I/O module]
Signal type
[Channel x
(x = 0...3)]
*)
Factory setting
Value
*)
deactivated
activated
Channel deactivated
0-5 V
1-5 V
+/-5 V
0-10 V
2-10 V
+/-10 V
0-10 mA
2-10 mA
+/-10 mA
0-20 mA
*)
4-20 mA
+/-20 mA
0-12 V
+/-12 V
0-22 mA
+/-22 mA
0-12 mA
+/-12 mA
Commissioning
WAGO-I/O-CHECK
Selection field Value
Synchronous Off
D/A conversion
On
[I/O module]
Signal type Channel deactivated
[Channel x
0-5 V
(x = 1...4)]
1-5 V
±5 V
0-10 V
2-10 V
±10 V
0-10 mA
2-10 mA
±10 mA
0-20 mA
4-20 mA
±20 mA
0-12 V
±12 V
0-22 mA
±22 mA
0-12 mA
±12 mA
77
*)
*)
Manual
Version 1.0.0