Profinet Io Fieldbus Couplers 750-375(/025-000), 750-377(/025-000); 2Ai Tc Parameterization; Figure 19: Example Of The Profibus Dp Fieldbus Couplers/Controllers Parameterization Dialog; Table 37: Profinet Io Configuration - WAGO 750-469 Manual

WAGO-I/O-SYSTEM 750
750-469 2AI Thermocouple
8.1.1.2 PROFINET IO Fieldbus Couplers
750-375(/025-000), 750-377(/025-000)
When using the aforementioned PROFINET IO fieldbus couplers, the process image
size is configured by selecting the corresponding GSD entry.

Table 37: PROFINET IO Configuration

GSD Entry
Module
75x-469(/0..-000)
2AI, TC
8.1.2

2AI TC Parameterization

The I/O module can be supplied with all operating parameters when selecting the
module entry in the GSD file on the PROFIBUS DP
devices.

Figure 19: Example of the PROFIBUS DP Fieldbus Couplers/Controllers parameterization dialog

*)
Only available for GSD entry „75x-469 2AI/TC/OCM, PRM" and
„75x-469 2AI/TC/OCM RA, PRM".
Manual
Version 1.1.0
Sub-Module
INT16[2] I
{UINT8, INT16}[2] I/O
PI-Length/[Byte] Data Type
I O
4 n/a
6 6 {UINT8, INT16}
) and PROFINET IO fieldbus
*
Appendix 55
Inst.
INT16
2