Control And Status Bytes; Table 17: Control Byte Ch1_C0 - WAGO 750-564 Manual

WAGO-I/O-SYSTEM 750
750-564 4AO U/I
4.2

Control and Status Bytes

Control and status bytes are implemented identically for all channels. Therefore,
the following description in this section applies to all control and status bytes of
the I/O module.

Table 17: Control Byte CH1_C0

Bit 7
Reg_Com = 0
Reg_Com = 1
Reg_Com
0/1
-
Control Byte CH1_C0, Byte 0
Bit 6 Bit 5
- -
0/1
Register communication
0: Switch register communication off
1: Switch register communication on
Reserved
Not used
Bit 4 Bit 3 Bit 2
- -
Register number
Process Image 31
Bit 1 Bit 0
- - -
Manual
Version 1.0.0