WAGO 750-535/040-000 Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. Control Unit
  5. 750-535/040-000
  6. Manual

WAGO 750-535/040-000 Manual

2-channel digital output; 24 vdc; intrinsically safe; extreme for wago i/o system 750 xtr
Hide thumbs
Table of Contents

  • Deutsch
    • Table of Contents
    • Copyright
    • Notes about this Documentation
    • Validity of this Documentation
    • Symbols
    • Number Notation
    • Font Conventions
    • Table 1: Number Notation
    • Table 2: Font Conventions
    • Personnel Qualifications
    • Use of the 750 Series in Compliance with Underlying Provisions
    • Subject to Changes
    • Legal Bases
    • Important Notes
    • Technical Condition of Specified Devices
    • 2.1.4.1.1 Electrical and Electronic Equipment
    • Disposal
    • 2.1.4.1.2 Packaging
    • Safety Advice (Precautions)
    • Device Description
    • View
    • Figure 1: View
    • Table 3: Legend for Figure "View
    • Connectors
    • Data Contacts/Local Bus
    • Figure 2: Data Contacts
    • Table 4: Legend for Figure "Power Jumper Contacts
    • Power Jumper Contacts/Field Supply
    • Figure 3: Power Jumper Contacts
    • Cage Clamp
    • Figure 4: CAGE CLAMP ® Connectors
    • Table 5: Legend for Figure "CAGE CLAMP ® Connectors
    • Display Elements
    • Operating Elements
    • Figure 5: Display Elements
    • Table 6: Legend for Figure "Display Elements
    • Schematic Diagram
    • Figure 6: Schematic Diagram
    • Table 8: Technical Data - Power Supply
    • Table 7: Technical Data - Device
    • Power Supply
    • Device Data
    • Technical Data
    • Outputs
    • Figure 7: Output Characteristic, Resistive Load
    • Table 9: Technical Data - Outputs
    • Explosion Protection
    • Communication
    • Table 10: Technical Data - Explosion Protection
    • Table 11: Technical Data - Communication
    • Table 13: Technical Data - Power Jumper Contacts
    • Table 15: Technical Data - Mechanical Conditions
    • Table 14: Technical Data - Data Contacts
    • Table 16: Technical Data - Climatic Environmental Conditions
    • Table 12: Technical Data - Field Wiring
    • Climatic Environmental Conditions
    • Mechanical Conditions
    • Connection Type
    • Approvals
    • Standards and Guidelines
    • Table 17: Standards and Rated Conditions for Explosion Protection
    • Table 18: Climatic and Mechanical Environmental Conditions and
    • Table 19: EMC - Immunity to Interference
    • Table 20: EMC - Emission of Interference
    • Process Image
    • Table 21: Output Bits
    • Mounting
    • Mounting Sequence
    • Figure 8: Insert I/O Module (Example)
    • Inserting the I/O Module
    • Inserting and Removing Devices
    • Removing the I/O Module
    • Figure 9: Snap the I/O Module into Place (Example)
    • Figure 10: Removing the I/O Module (Example)
    • Connect Devices
    • Connecting a Conductor to the CAGE CLAMP
    • Figure 11: Connecting a Conductor to a CAGE CLAMP
    • Power Supply Concept
    • Figure 12: Ex I XTR Power Supply Concept
    • Table 22: Legend for Figure "Ex I XTR Power Supply Concept
    • Figure 13: Overvoltage Categories
    • Table 23: Legend for Figure "Overvoltage Categories
    • Supplementary Power Supply Regulations
    • Table 24: Filter Modules for 24V Power Supply
    • Figure 14: Power Supply Concept, Example 1
    • Table 25: Legend for Figure "Power Supply Concept, Example 1
    • Figure 15: Power Supply Concept, Example 2
    • Table 26: Legend for Figure "Power Supply Concept, Example 2
    • Connection Example
    • Figure 16: Connecting Diagram
    • Use in Hazardous Environments
    • Marking Configuration Examples
    • Marking for Europe According to ATEX and Iecex
    • Figure 17: Marking Example According to ATEX and Iecex
    • Figure 18: Text Detail - Marking Example According to ATEX and Iecex
    • Table 27: Description of Marking Example According to ATEX and Iecex
    • Figure 19: Marking Example for Approved Ex I I/O Module According to
    • Figure 20: Text Detail - Marking Example for Approved Ex I I/O Module According to ATEX and Iecex
    • Table 30: Description of Marking Example for Approved Ex I I/O Module
    • Table 28: Description of Marking Example for Approved Ex I I/O Module According to ATEX and Iecex
    • Marking for the United States of America (NEC) and Canada (CEC)
    • Figure 21: Marking Example According to NEC
    • Figure 22: Text Detail - Marking Example According to NEC 500
    • Table 29: Description of Marking Example According to NEC 500
    • Figure 23: Text Detail - Marking Example for Approved Ex I I/O Module
    • Figure 24: Text Detail - Marking Example for Approved Ex I I/O Module
    • Table 31: Description of Marking Example for Approved Ex I I/O Modules
    • Figure 25: Text Detail - Marking Example for Approved Ex I I/O Modules
    • Table 32: Description of Marking Example for Approved Ex I I/O Modules
    • Installation Regulations
    • Special Notes Including Explosion Protection
    • Special Notes Regarding ANSI/ISA Ex

  • English

Advertisement

Quick Links

Download this manual
Manual
Pos: 2 /Dokumentation allgemein/Einband/Einband Frontseite - Handbuch; CI 2017; mit DocVariablen (Standard) @ 28\mod_1486477502910_0.docx @ 405388 @ @ 1
WAGO I/O SYSTEM 750 XTR
750-535/040-000
2DO 24 VDC Ex i XTR
2-Channel Digital Output; 24 VDC; Intrinsically Safe;
Extreme
Version 1.1.0
Pos: 3 /Alle Serien (Allgemeine Module)/Rechtliches, Allgemeines/Impressum für Standardhandbücher - allg. Angaben, Anschriften, Telefonnummern und E-Mail-Adressen @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 750-535/040-000 and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO 750-535/040-000

Summary of Contents for WAGO 750-535/040-000

  • Page 1 Manual Pos: 2 /Dokumentation allgemein/Einband/Einband Frontseite - Handbuch; CI 2017; mit DocVariablen (Standard) @ 28\mod_1486477502910_0.docx @ 405388 @ @ 1 WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR 2-Channel Digital Output; 24 VDC; Intrinsically Safe; Extreme Version 1.1.0...
  • Page 2 We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. === Ende der Liste für Textmarke Einband_vorne === Manual...

  • Page 3: Table Of Contents

    WAGO I/O SYSTEM 750 XTR Table of Contents 750-535/040-000 2DO 24 VDC Ex i XTR Pos: 5 /Dokumentation allgemein/Verzeichnisse/Inhaltsverzeichnis - Überschrift oG und Verzeichnis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1 Table of Contents Notes about this Documentation .............. 5 Validity of this Documentation ..............
  • Page 4 Table of Contents WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Power Supply Concept ................40 6.2.1 Supplementary Power Supply Regulations ........43 Connection Example ................46 Use in Hazardous Environments ............47 Marking Configuration Examples ............48 7.1.1...

  • Page 5: Notes About This Documentation

    Pos: 9 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Gültigkeitsbereich - Überschrift 2 @ 12\mod_1338912448776_21.docx @ 96469 @ 2 @ 1 Validity of this Documentation Pos: 10 /Serie 750 (WAGO I/O SYSTEM)/Hinweise zur Dokumentation (alte Struktur)/Gültigkeitsbereich/Gültigkeitsbereich Dokumentation I/O-Modul 750-xxxx, ohne Variantenangabe @ 14\mod_1358944037947_21.docx @ 109346 @ @ 1 This documentation is only applicable to the I/O module 750-535/040-000 (2DO 24 VDC Ex i XTR).

  • Page 6: Symbols

    Notes about this Documentation WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Pos: 12.4 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Symbole - Überschrift 2 @ 13\mod_1351068042408_21.docx @ 105270 @ 2 @ 1 Symbols Pos: 12.5.1 /Alle Serien (Allgemeine Module)/Sicherheits- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschäden allgemein_ - Erläuterung @ 13\mod_1343309450020_21.docx @ 101029 @ @ 1...

  • Page 7: Number Notation

    WAGO I/O SYSTEM 750 XTR Notes about this Documentation 750-535/040-000 2DO 24 VDC Ex i XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos: 12.6 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1 Pos: 12.7 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Darstellung der Zahlensysteme - Überschrift 2 @ 23\mod_1435647128078_21.docx @ 184811 @ 2 @ 1...

  • Page 8: Important Notes

    Provisions Pos: 15.6 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Bestimmungsgemäße Verwendung/Bestimmungsgemäße Verwendung 750- xxxx für Geräte - STD - mit EN 61000-6-3 @ 3\mod_1224064151234_21.docx @ 24070 @ @ 1 Fieldbus couplers, controllers and I/O modules found in the modular WAGO I/O SYSTEM 750 receive digital and analog signals from sensors and transmit them to actuators or higher-level control systems.

  • Page 9: Technical Condition Of Specified Devices

    These modules contain no parts that can be serviced or repaired by the user. The following actions will result in the exclusion of liability on the part of WAGO Kontakttechnik GmbH & Co. KG: •...

  • Page 10: 2.1.4.1.2 Packaging

    Important Notes WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Environmentally friendly disposal benefits health and protects the environment from harmful substances in electrical and electronic equipment. • Observe national and local regulations for the disposal of electrical and electronic equipment.

  • Page 11: Safety Advice (Precautions)

    Always adhere to the EMC directives applicable to your application. Pos: 15.14 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Warnung/Warnung: Speisung ausschließlich aus SELV-/PELV-Versorgung (24V-XTR-I/O-Module) @ 29\mod_1493107132163_21.docx @ 419618 @ @ 1 Power from SELV/PELV power supply only!
  • Page 12 Pos: 15.16.1 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: Einwandfreie Kontaktierung zur Tragschiene gewährleisten! @ 34\mod_1550481407638_21.docx @ 530599 @ @ 1 Ensure proper contact with the DIN-rail! Proper electrical contact between the DIN-rail and device is necessary to maintain the EMC characteristics and function of the device.
  • Page 13 (personnel, work space and packaging) are properly grounded. Pos: 15.17 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: XTR - Isolationsprüfungen mit DC durchführen! @ 15\mod_1370843209441_21.docx @ 122210 @ @ 1 Use only direct current (DC) for insulation testing! Both the system voltage and field voltage side are capacitively coupled to the DIN-rail.

  • Page 14: Device Description

    Zone 1, such as intrinsically safe magnetic valves. Pos: 18.1.2 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Warnung/Warnung: Ex i Installation des WAGO-I/O-SYSTEM 750 nur in Zone 2 oder im nicht-ex-Bereich @ 5\mod_1245851655116_21.docx @ 35947 @ @ 1...
  • Page 15 Pos: 18.1.14 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Einleitung/Einsatzbereich/Einsatzbereich 750-xxxx/040-000 alle XTR-Koppler/Controller ohne Einschränkung+Mischbetriebhinweise @ 15\mod_1368425919479_21.docx @ 119444 @ @ 1 The I/O module can be operated with all fieldbus couplers/controllers of the WAGO I/O SYSTEM 750 XTR.

  • Page 16: View

    Pos: 18.4 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Ansicht/DO/Ansicht 750-0535/040-000 @ 28\mod_1487171804465_21.docx @ 407726 @ @ 1 Figure 1: View Pos: 18.5 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Ansicht/Ansicht CageClamp®_Legende mit LEDs, mit 1 Entriegelungslasche @ 15\mod_1370867188922_21.docx @ 122225 @ @ 1 Table 3: Legend for Figure “View”...

  • Page 17: Connectors

    Do not place the I/O modules on the gold spring contacts in order to avoid soiling or scratching! Pos: 18.9.3 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: ESD - Auf Potentialausgleich der Umgebung achten! @ 32\mod_1539077262331_21.docx @ 504433 @ @ 1 Pay attention to potential equalization from the environment! The devices are equipped with electronic components that may be destroyed by electrostatic discharge.

  • Page 18: Power Jumper Contacts/Field Supply

    Potential feed-in (U ) for field supply Pos: 18.12.5 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: Maximaler Strom Ex i Einspeisung 750-0606/040-000 XTR @ 28\mod_1486128985806_21.docx @ 405244 @ @ 1 Do not exceed maximum current via power contacts! The maximum current available from the “Power Supply 24 VDC Diagn for Ex i...

  • Page 19: Cage Clamp

    WAGO I/O SYSTEM 750 XTR Device Description 750-535/040-000 2DO 24 VDC Ex i XTR Pos: 18.14 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/CAGE CLAMP-Anschlüsse - Überschrift 3 @ 6\mod_1256296337770_21.docx @ 43674 @ 3 @ 1 3.2.3 CAGE CLAMP Connectors ®...

  • Page 20: Display Elements

    Pos: 18.19 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Bedienelemente - Überschrift 2 @ 4\mod_1239191655456_21.docx @ 30439 @ 2 @ 1 Operating Elements Pos: 18.20 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Bedienelemente/Bedienelemente I/O-Modul 75x-xxxx nicht vorhanden @ 4\mod_1236322031125_21.docx @ 28063 @ @ 1 The I/O module 750-535/040-000 has no operating elements.

  • Page 21: Schematic Diagram

    Pos: 18.22 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Schematisches Schaltbild - Überschrift 2 @ 4\mod_1240984441312_21.docx @ 31967 @ 2 @ 1 Schematic Diagram Pos: 18.23 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Schematische Schaltbilder/DO/Schematisches Schaltbild 750-0535/040-000 @ 28\mod_1487171872081_21.docx @ 407729 @ @ 1 Figure 6: Schematic Diagram Pos: 18.24 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1...

  • Page 22: Technical Data

    Pos: 18.25 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Technische Daten - Überschrift 2 @ 3\mod_1232967587687_21.docx @ 26924 @ 2 @ 1 Technical Data Pos: 18.26.1 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Technische Daten/VS (Variablensteuerung)/Technische Daten Gerät (VS) - XTR @ 15\mod_1369311215011_21.docx @ 120260 @ 3 @ 1 3.6.1 Device Data Table 7: Technical Data –...

  • Page 23: Outputs

    WAGO I/O SYSTEM 750 XTR Device Description 750-535/040-000 2DO 24 VDC Ex i XTR 3.6.3 Outputs Table 9: Technical Data – Outputs Number of outputs Signal type 24 VDC Output characteristic High-side switching Load type Resistive, inductive, lamps Actuator connection...

  • Page 24: Explosion Protection

    0.1 mH 1.30 µF 0.001 mH 3.85 µF Pos: 18.26.3 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Technische Daten/VS (Variablensteuerung)/Technische Daten Kommunikation (VS) @ 4\mod_1242119312796_21.docx @ 32970 @ 3 @ 1 3.6.5 Communication Table 11: Technical Data – Communication Data width...

  • Page 25: Connection Type

    Data contacts Slide contact, self-cleaning, hard gold plated Pos: 18.26.5 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Technische Daten/VS (Variablensteuerung)/Technische Daten Mechanische Bedingungen (VS) - XTR @ 15\mod_1369387569701_21.docx @ 120364 @ 3 @ 1 3.6.7 Mechanical Conditions Table 15: Technical Data – Mechanical Conditions Vibration resistance Max.

  • Page 26: Approvals

    Approvals Pos: 18.29 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Zulassungen/komplett - NUR FÜR XTR ! (Allgemein, Ex, Schiff)/XTR (Paket 3)/Zulassungen XTR Bundle III (Ex i außer 606) @ 30\mod_1506082019831_21.docx @ 461793 @ @ 1 The following approvals have been granted for the I/O module 750-535/040-000:...
  • Page 27 Env. 1, 2, 3, 4 PRS (Polski Rejestr Statków) Pos: 18.30 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Zulassungen/Information: Weitere Informationen zu Zulassungen 750-xxxx @ 3\mod_1227190967156_21.docx @ 25221 @ @ 1 More information about approvals. Detailed references to the approvals are listed in the document “Overview Approvals WAGO I/O SYSTEM 750”, which you can find via the internet under:...

  • Page 28: Standards And Guidelines

    EN 60079-11 ed. 6 Equipment protection by intrinsic safety “i” Pos: null /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Normen und Richtlinien/Normen und Richtlinien XTR - Mechanik und Klima Komponenten-HB 2017 - Ex-i-Module @ 36\mod_1586553217517_21.docx @ 580429 @ @ 1 Manual...

  • Page 29: Table 18: Climatic And Mechanical Environmental Conditions And

    WAGO I/O SYSTEM 750 XTR Device Description 750-535/040-000 2DO 24 VDC Ex i XTR Table 18: Climatic and Mechanical Environmental Conditions and Shipbuilding Standard Test Value Transport EN 60870-2-2 Ct2(2k4) (except precipitation/water/moisture) Mechanical Environmental Conditions EN 61850-3 Achieved EN 60870-2-2...

  • Page 30: Table 19: Emc - Immunity To Interference

    750-535/040-000 2DO 24 VDC Ex i XTR Pos: 18.33.5 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Normen und Richtlinien/EMV-Normen I/O-Modul 750-xxxx/0040-0000, nur Standardversion - Einleitung XTR @ 18\mod_1395909426189_21.docx @ 149708 @ @ 1 The I/O module 750-535/040-000 meets the following EMC standards as these standards relate to the I/O module: Pos: 18.33.6 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Normen und Richtlinien/Normen Störfestigkeit XTR (Ex i) @ 30\mod_1511444695822_21.docx @ 471138 @ @ 1...
  • Page 31 • Shipbuilding Standard not applicable The list of ship certifications issued is available in the section “Approvals”. Pos: 18.33.7 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Normen und Richtlinien/Normen Störaussendung XTR @ 18\mod_1394087664442_21.docx @ 147358 @ @ 1 Manual Version 1.1.0...

  • Page 32: Table 20: Emc - Emission Of Interference

    Device Description WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Table 20: EMC – Emission of Interference Standard Test Value Enclosure Emission of Interference • EN 61000-6-3 30 dB(µV/m), QP, 30 MHz … 230 MHz • EN 55032 Class B 37 dB(µV/m), QP, 230 MHz …...
  • Page 33 WAGO I/O SYSTEM 750 XTR Device Description 750-535/040-000 2DO 24 VDC Ex i XTR Table 20: EMC – Emission of Interference Standard Test Value Conducted Emission of Interference – Line Connection DC Voltage • EN 61000-6-3 79 dB(µV) QP, 0.15 MHz … 0.5 MHz •...

  • Page 34: Process Image

    Pos: 20 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 1/Prozessabbild - Überschrift 1 @ 4\mod_1240983067828_21.docx @ 31942 @ 1 @ 1 Process Image Pos: 21 /Serie 750 (WAGO I/O SYSTEM)/Prozessabbild Lokalbus/Hinweis: Prozessabbildmapping abhängig von FBK/PFC, ohne Status-/Controlbyte XTR @ 18\mod_1396511070508_21.docx @ 150676 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variations in the process image depends on the fieldbus coupler/controller used.

  • Page 35: Mounting

    Do not touch the blade contacts. Pos: 25.3 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Warnung/Warnung: Anforderungen an Luft- und Kriechstrecken (XTR Ex i) @ 36\mod_1579514444035_21.docx @ 572089 @ @ 1 Requirements for Clearances and Creepage Distances For all sections of a node that contain I/O modules for Ex-i use, stricter require- ments with regard to clearances and creepage distances apply.
  • Page 36 You must always use this bus end module at all fieldbus nodes with the WAGO I/O SYSTEM 750 XTR fieldbus couplers/controllers to guarantee proper data transfer. Pos: 25.6 /Serie 750 (WAGO I/O SYSTEM)/Montieren/Demontieren/I/O-Module 750xxxx/0040xxxx 4g-5g @ 15\mod_1367558844291_21.docx @ 118470 @ @ 1 For vibration loads > 4g, observe the following installation instructions: •...

  • Page 37: Inserting And Removing Devices

    Switch off all power to the device prior to performing any installation, repair or maintenance work. Pos: 25.11 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: XTR nicht unter -20 °C verdrahten oder umstecken @ 15\mod_1367559895186_21.docx @ 118480 @ @ 1 Temperature range applies to normal operation! XTR I/O modules may be operated below −20 °C, but not wired and/or...

  • Page 38: Removing The I/O Module

    (if any) to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are established. Pos: 25.13 /Serie 750 (WAGO I/O SYSTEM)/Montieren/Demontieren/obsolet_XTR-I/O-Modul entfernen @ 28\mod_1486551166032_21.docx @ 405491 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.

  • Page 39: Connect Devices

    Pos: 27 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 1/Geräte anschließen - Überschrift 1 @ 3\mod_1234172889468_21.docx @ 27460 @ 1 @ 1 Connect Devices Pos: 28 /Serie 750 (WAGO I/O SYSTEM)/Anschließen/Leiter an CAGE CLAMP anschließen (allgemein) - Überschrift 2 und Text @ 3\mod_1225448660171_21.docx @ 24928 @ 2 @ 1 Connecting a Conductor to the CAGE CLAMP ®...

  • Page 40: Power Supply Concept

    Diagn for Ex i XTR Modules” 750-606/040-000. Pos: 31.2 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Warnung/Warnung: Anforderungen an Luft- und Kriechstrecken (XTR Ex i) @ 36\mod_1579514444035_21.docx @ 572089 @ @ 1 Requirements for Clearances and Creepage Distances For all sections of a node that contain I/O modules for Ex-i use, stricter require- ments with regard to clearances and creepage distances apply.

  • Page 41: Figure 12: Ex I Xtr Power Supply Concept

    I/O modules via the power contacts designed as spring contacts. Pos: 31.7 /Serie 750 (WAGO I/O SYSTEM)/Anschließen/Einspeisekonzepte/Ex-i-Einspeisung außerhalb Schiffsbereich XTR - Abbildung sprachneutral + Legende @ 28\mod_1487083585744_21.docx @ 407624 @ @ 1 Figure 12: Ex i XTR Power Supply Concept Table 22: Legend for Figure “Ex i XTR Power Supply Concept”...

  • Page 42: Figure 13: Overvoltage Categories

    Connect Devices WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Figure 13: Overvoltage Categories Table 23: Legend for Figure “Overvoltage Categories” Pos. Explanation XTR fieldbus coupler/controller XTR filter module XTR supply module “Power Supply 24 VDC Diagn for Ex i XTR Modules”...

  • Page 43: Supplementary Power Supply Regulations

    (surge) Therefore, the following power supply concepts must be observed: Pos: 31.10.2 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Warnung/Warnung: Ex-i-Schiffseinspeisung nur mit Filtermodul XTR @ 28\mod_1486133978849_21.docx @ 405282 @ @ 1 Use the appropriate filter module! When using Ex i XTR I/O modules in shipping, station control and telecontrol technology, the supply voltage of the “Power Supply 24 VDC Diagn for Ex i XTR...

  • Page 44: Figure 14: Power Supply Concept, Example 1

    XTR supply “Power Supply 24 VDC Diagn for Ex i XTR Modules” 750-606/040-000 I/O modules Ex i XTR XTR end module Pos: 31.10.4 /Serie 750 (WAGO I/O SYSTEM)/Anschließen/Einspeisekonzepte/ Ex-i-Einspeisekonzept mit 2 Filtermodulen XTR @ 28\mod_1486134344254_21.docx @ 405288 @ @ 1 Manual Version 1.1.0...

  • Page 45: Figure 15: Power Supply Concept, Example 2

    WAGO I/O SYSTEM 750 XTR Connect Devices 750-535/040-000 2DO 24 VDC Ex i XTR Figure 15: Power Supply Concept, Example 2 Table 26: Legend for Figure “Power Supply Concept, Example 2“ Pos. Explanation XTR fieldbus coupler / controller XTR filter module 750-626/040-000 XTR filter module (750-626/040-000 or 750-624/040-001) XTR supply 750-606/040-000 “Power Supply 24 VDC Diagn for Ex i XTR...

  • Page 46: Connection Example

    Pos: 33 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Anschlussbeispiel - Überschrift 2 @ 4\mod_1242621672468_21.docx @ 33293 @ 2 @ 1 Connection Example Pos: 34 /Serie 750 (WAGO I/O SYSTEM)/Anschließen/Anschlussbeispiele/Digitalausgänge/Anschlussbeispiele 750-05xx_2DO_2L @ 21\mod_1414753929915_21.docx @ 167078 @ @ 1 Figure 16: Connecting Diagram Pos: 35 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1 Manual Version 1.1.0...

  • Page 47: Use In Hazardous Environments

    Pos: 36.1 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 1/Einsatz in explosionsgefährdeten Bereichen - Überschrift 1 @ 3\mod_1224075191281_21.docx @ 24084 @ 1 @ 1 Use in Hazardous Environments Pos: 36.2 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Einsatzbereich Serie 750 @ 3\mod_1234272230203_21.docx @ 27500 @ @ 1 The WAGO I/O SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas and shall be used in accordance with the marking and installation regulations.

  • Page 48: Marking Configuration Examples

    7.1.1 Marking for Europe According to ATEX and IECEx Pos: 36.6 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung ATEX und IECEx_TUEV07_2017 @ 14\mod_1360569228625_21.docx @ 111294 @ @ 1 Figure 17: Marking Example According to ATEX and IECEx Figure 18: Text Detail – Marking Example According to ATEX and IECEx Manual Version 1.1.0...

  • Page 49: Table 27: Description Of Marking Example According To Atex And Iecex

    WAGO I/O SYSTEM 750 XTR Use in Hazardous Environments 750-535/040-000 2DO 24 VDC Ex i XTR Table 27: Description of Marking Example According to ATEX and IECEx Marking Description TUEV 07 ATEX 554086 X Approving authority resp. certificate numbers IECEx TUN 09.0001 X...

  • Page 50: Figure 19: Marking Example For Approved Ex I I/O Module According To

    750-535/040-000 2DO 24 VDC Ex i XTR Pos: 36.8 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung ATEX und IECEx_TUEV12_Ex i_2017 @ 14\mod_1360569320118_21.docx @ 111298 @ @ 1 Figure 19: Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Figure 20: Text Detail –...

  • Page 51: Table 28: Description Of Marking Example For Approved Ex I I/O Module According To Atex And Iecex

    WAGO I/O SYSTEM 750 XTR Use in Hazardous Environments 750-535/040-000 2DO 24 VDC Ex i XTR Table 28: Description of Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Marking Description TUEV 12 ATEX 106032 X Approving authority resp.

  • Page 52: Marking For The United States Of America (Nec) And Canada (Cec)

    Pos: 36.10 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung NEC und CEC_2017 @ 29\mod_1497866336326_21.docx @ 424745 @ @ 1 Figure 21: Marking Example According to NEC Pos: 36.11 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung und Textdetail NEC 500_2017 @ 14\mod_1360580302684_21.docx @ 111353 @ @ 1 Figure 22: Text Detail – Marking Example According to NEC 500...

  • Page 53: Figure 23: Text Detail - Marking Example For Approved Ex I I/O Module

    750-535/040-000 2DO 24 VDC Ex i XTR Pos: 36.13 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung und Textdetail NEC 505_2017 @ 29\mod_1497865583500_21.docx @ 424739 @ @ 1 Figure 23: Text Detail – Marking Example for Approved Ex i I/O Module According to NEC 505...

  • Page 54: Figure 25: Text Detail - Marking Example For Approved Ex I I/O Modules

    750-535/040-000 2DO 24 VDC Ex i XTR Pos: 36.16 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Beispielbedruckung und Textdetail CEC_2017 @ 29\mod_1497865583297_21.docx @ 424736 @ @ 1 Figure 25: Text Detail – Marking Example for Approved Ex i I/O Modules According to CEC 18...

  • Page 55: Installation Regulations

    7.2.1 Special Notes including Explosion Protection Pos: 36.21.2 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/Besondere Hinweise einschließlich Explosionsschutz_2017 @ 29\mod_1491556994025_21.docx @ 415448 @ @ 1 The following warning notices are to be posted in the immediately proximity of the WAGO I/O SYSTEM 750 (hereinafter “product”): WARNING –...
  • Page 56 Use in Hazardous Environments WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...

  • Page 57: Special Notes Regarding Ansi/Isa Ex

    Pos: 36.21.4 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 3/Besondere Hinweise hinsichtlich ANSI/ISA Ex - Überschrift 3 @ 29\mod_1491558494822_21.docx @ 415468 @ 3 @ 1 7.2.2 Special Notes Regarding ANSI/ISA Ex Pos: 36.21.5 /Serie 750 (WAGO I/O SYSTEM)/Einsatz in Ex-Bereichen/ANSI/ISA gemäß UL File E198726_2017 @ 29\mod_1491557259544_21.docx @ 415451 @ @ 1 For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements apply: •...

  • Page 58: List Of Figures

    List of Figures WAGO I/O SYSTEM 750 XTR 750-535/040-000 2DO 24 VDC Ex i XTR Pos: 38 /Dokumentation allgemein/Verzeichnisse/Abbildungsverzeichnis - Überschrift oG und Verzeichnis @ 3\mod_1219222916765_21.docx @ 21080 @ @ 1 List of Figures Figure 1: View ...................... 16 Figure 2: Data Contacts ..................17 Figure 3: Power Jumper Contacts ...............

  • Page 59: List Of Tables

    WAGO I/O SYSTEM 750 XTR List of Tables 750-535/040-000 2DO 24 VDC Ex i XTR Pos: 40 /Dokumentation allgemein/Verzeichnisse/Tabellenverzeichnis - Überschrift oG und Verzeichnis @ 3\mod_1219222958703_21.docx @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................7 Table 2: Font Conventions ..................
  • Page 60 Pos: 42 /Dokumentation allgemein/Einband/Einband - Leerseite für durch 2 teilbare Seitenzahl (Standarddruck) @ 3\mod_1219230851078_0.docx @ 21123 @ @ 1 Pos: 43 /Dokumentation allgemein/Einband/Einband Rückseite - alle Dokumente; CI 2017 @ 28\mod_1486477503580_21.docx @ 405394 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •...

This manual is also suitable for:

2do 24 vdc ex i xtr

Table of Contents