Recalibration - WAGO 750-564 Manual

WAGO-I/O-SYSTEM 750
750-564 4AO U/I
12.2

Recalibration

Calibrating the I/O module may provide the process value accuracy required by the
application.
It may be necessary to perform a recalibration in order to maintain the accuracy despite
aging of individual components of the line.
determine the intervals at which such recalibration is to be performed.
The corresponding sections on the topic of calibration explain how the recalibration is to
be performed with the help of the various commissioning tools.
The operator of the equipment must
Service 97
Manual
Version 1.0.0