12.1 Initial configuration via RSP mbCONNECT24 V 2.0
If you not have an account for the
remote service portal, here given
the necessary information on how
to request your access to mbCO-
NENCT24 and how you connect to
the portal.
Here you can find out how to create
a device and perform the initial con-
figuration for your mbNET.mini.
In this section you will learn the dif-
ferent methods, how to transfer the
configuration to the mbNET.mini.
In the last section we show you how
to connect to devices and machines,
and how you finish your mbCON-
NECT24 session tidy.
Page 22 von 131 | Version: 2.2.1 - EN | Mar 28
th
, 2022 |