1.2 Features
The CYW43353 supports the following features:
IEEE 802.11a/b/g/n/ac dual-band radio with virtual-simultaneous dual-band operation
■
Bluetooth v4.1 + EDR with integrated Class 1 PA
■
Concurrent Bluetooth and WLAN operation
■
On-chip WLAN driver execution capable of supporting IEEE 802.11 functionality
■
WLAN host interface options:
■
SDIO v3.0 (1-bit/4-bit)—up to 208 MHz clock rate in SDR104 mode
❐
gSPI—up to 48 MHz clock rate
❐
BT host digital interface (which can be used concurrently with the above interfaces):
■
UART (up to 4 Mbps)
❐
ECI—enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receptions
■
2
I
S/PCM for BT audio
■
HCI high-speed UART (H4, H4+, H5) transport support
■
Wideband speech support (16 bits linear data, MSB first, left justified at 4K samples/s for transparent air coding, both through I
■
and PCM interface)
®
Bluetooth SmartAudio
■
Bluetooth low-power inquiry and page scan
■
Bluetooth Low Energy (BLE) support
■
Bluetooth Packet Loss Concealment (PLC)
■
Bluetooth Wide Band Speech (WBS)
■
Audio rate-matching algorithms
■
1.3 Standards Compliance
The CYW43353 supports the following standards:
Bluetooth 2.1 + EDR
■
Bluetooth 3.0
■
Bluetooth 4.1 (Bluetooth Low Energy)
■
IEEE802.11ac single-stream mandatory and optional requirements for 20 MHz, 40 MHz, and 80 MHz channels
■
IEEE 802.11n—Handheld Device Class (Section 11)
■
IEEE 802.11a
■
IEEE 802.11b
■
IEEE 802.11g
■
IEEE 802.11d
■
IEEE 802.11h
■
IEEE 802.11i
■
Document Number: 002-14949 Rev. *G
PRELIMINARY
technology improves voice and music quality for automotive and industrial applications
CYW43353
2
S
Page 8 of 113