Geometry Settings; Settable Work Offset (G54 To G57, G505 To G599, G53, G500, Supa, G153) - Siemens SINUMERIK 828D Programming Manual

Geometry settings

8.1 Settable work offset (G54 to G57, G505 to G599, G53, G500,
SUPA, G153)
Function
The workpiece zero in relation to the zero point of the basic coordinate system is set up by
the settable zero offset (
In this way it is possible to call zero points program-wide per G command (e.g. for different
devices).
Milling:
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
to and to
G54 G57 G505
) in all axes.
G599
8
159