Siemens SINUMERIK 828D Programming Manual page 65

Note
If the selected magazine location is not occupied in a tool magazine, the command acts as
for
empty location.
Example
Program code
N10 T=1 M6
N20 D1
N30 G1 X10 ...
...
N70 T="Drill"
N80 ...
...
N100 M6
N140 D1 G1 X10 ...
...
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
. The selection of the next occupied magazine location can be used to position the
T0
4.2 Tool change with tool management (option)
Comment
; Loading of the tool from magazine location 1.
; Selection of tool length compensation.
; Machining with tool T=1.
; Preselection of the tool with name "Drill".
; Machining with tool T=1.
; Loading of the drill.
; Machining with drill.
Tool change
65