9.6.7
Circular interpolation with tangential transition (CT, X... Y... Z...)
Function
The Tangential transition function is an expansion of the circle programming.
The circle is defined by:
● The start and end point and
● The tangent direction at the start point.
The G code
previously.
Determination of the tangent direction
The tangent direction in the starting point of a CT block is determined from the end tangent
of the programmed contour of the last block with a traversing motion.
There can be any number of blocks without traversing information between this block and
the current block.
Syntax
CT X... Y... Z...
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
produces an arc that lies at a tangent to the contour element programmed
CT
Motion commands
9.6
Circular interpolation
233