Tool Offset Call (D) - Siemens SINUMERIK 828D Programming Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Tool offset call (D)

Cutting edges 1 to 8 (with active TOOLMAN 12) of a tool can be assigned different tool offset

data records (e.g. different offset values for the left and right cutting edge of a grooving tool).

Activation of the offset data (including the data for the tool length compensation) of a special

cutting edge is performed by calling the D number. When

tool have no effect.

A tool radius compensation must also be activated via

Tool length offsets take immediate effect when the D number is programmed. If no D number

is programmed, the default setting defined via the machine data is active for a tool change

(→ see machine manufacturer's specifications).

Activation of a tool offset data record:

Activate the tool radius compensation:

Deactivation of the tool offsets:

Fundamentals

Programming Manual, 07/2010, 6FC5398-1BP40-0BA0

5.6 Tool offset call (D)

is programmed, offsets for the

Tool offsets

Show Quick Links

Table of Contents