Example 3: Incremental dimensions without traversing of the active zero offset
Settings:
● G54 contains an offset in X of 25
● SD42440 $SC_FRAME_OFFSET_INCR_PROG = 0
Program code
N10 G90 G0 G54 X100
N20 G1 G91 X10
N30 G90 X50
See also
Absolute and incremental dimensions for turning and milling (G90/G91) (Page 175)
8.3.3
Absolute and incremental dimensions for turning and milling (G90/G91)
The two following figures illustrate the programming with absolute dimensions (
incremental dimensions (
Milling:
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Comment
; Incremental dimensions active, traversing in X of 10 mm
(the zero offset is not traversed).
; Absolute dimensions active, traverse to position X75 (the
zero offset is traversed).
) using turning and milling technology examples.
G91
Geometry settings
8.3 Dimensions
) or
G90
175